2. analog
  3. 1338076272

Cartridge Recommendations

I have a VPI Scout with a ZU/Denon DL103 mc cartridge. I am getting a new preamp that doesn't have provisions for a low output mc cartridge. I want to replace the cartridge with either a high output mc cartridge or a moving iron/magnet cartridge for less than 500.00 retail (new). I like the sound of my present cartridge as it plays all my old records well and rock sounds great with it.

Keeping all this in mind, I am open to suggestions to a cartridge that will work well with the JMW9 arm.

Thanks
128x128stereo5
stereo5's avatar
stereo5 OP
6,390 posts
 
I am thinking of a Soundsmith Otello or a Dynavector 10 X 5 cartridge. Anyone have experience with either?
mofimadness's avatar
mofimadness
4,987 posts
 
The Bob's Devices SUT is a 1:10 stepup. That will stepup your Zu/Denon 103 from .3mv to 3mv. It is listed with 20db of gain, not 10. That should be more than enough. Link is below:

http://www.bobsdevices.com/15095.htm

I would look for a used Silvercore "1 to 10" SUT. They retail for around $650, so a used one should be in your price range.

IMHO, the (2) carts you list above are not as good as what you have.
czbbcl's avatar
czbbcl
1,752 posts
 
Agree with the SUT suggestion (Bob's Devices)if you like the Denon.
mechans
3,048 posts
 
Dynevector 20X H but yes used a super cartridge if you can get one at you price. They were just made for (VPI) and Scouts in particular maybe someone has a demo or something.
stereo5's avatar
stereo5 OP
6,390 posts
 
I bought a Denon AU-320 SUT off of Audiogon for under 300.00 today. After reading everyones opinions, I decided this would be the way to go. The built in output cable also saves me money on yet another cable. I will report back once I have used it in my system for a couple of weeks. I am under the impression that the 40 ohm setting would be best. Any comments pro or con?

Bob
More to discover