2. analog
  3. 1340994751

Anyone who has had a VdH Colibri for over 1000hrs

I am on my 3rd Colibri and have never had one long enough to put over 400hrs on it. My current H.O. XCP is as sibilant as the prev. Colibris but I love it regardless because on over 50% of my collection it is sublime! I do however feel or hope that with lots more hours the suspension will loosen up and the tracking will improve and elimate most of the sibilance. Should I reset my optimistic expectations or is there hope after all?
vusi_khumalo
vusi_khumalo OP
72 posts
 
Cfluxa my first Colibri was a LW too and the few I have seen have long(er) cantilevers. So if you were 1mm out with alignment you could mod the screws and/or try trade to one with a shorter cantilever etc. Maybe I should expand that to say if you get hooked to the magic of the Colibri you might end up going through a few as they are all different. So with the limited adjustability of your setup you could get radically different results even if you stick to just the XGP LWs. Some have cantilevers that are not parallel to the body, and they dont have the same height and VTA. It has only just dawned on me why you say you are scared to death.
cfluxa's avatar
cfluxa
127 posts
 
Vusi - the only thing that scares me more than the idea of filing the threads on cartridge screws is "going through a few" of these things!

Seriously, I am interested what you think the differences are between the XGP LW and a regular XGP model? Is one more difficult to tame than the other? I believe the effective mass of my tonearm is 10.5g and the dealer told me he thought the LW would be a good match.
vusi_khumalo OP
72 posts
 
Cfluxa what I'm guessing you are referring to as 'regular' is in fact the Reference or higher end (and weight) cart. Must be honest the 2 XGP LWs I went through were from memory as good as the Ref XGP. I think the Ref is about 2gr heavier but it is my opinion that if effective mass wasn't an issue then the sound would be close. You are more likely to find bigger sonic differences if the cantilever length is different or when comparing to Wood and Metal bodied ones. I ventured into the Refs so I could try Copper coils and higher voltage output, options I don't remember being offered on LWs. I suspect that longer cantilever versions of Colibris are easier to tame. Might as well share that the Ref XCP H.O. (1mv) had a similar length (longer) cantilever to the last XGP LW (and was very tame/polite/tracked best) but it couldn't match the bass of the LW. Had to send it back, they installed a shorter cantilever. Now the bass was as good or better (also edgier at the top) and it sounded louder (more output?) which is great because the plan with H.O. was so I could run cart into MM input of Phono. As posted earlier I have since managed to get rid of most of the edginess.
lewm
13,553 posts
 
Vusi, I believe you bought my HO Colibri, and I bought it from Mike. So, you and Mike can compare notes directly. That Colibri has nearly traveled around the globe, especially if Mike sent it to vdH before I bought it from him. I would love to hear it again, against my current crop of cartridges.
vusi_khumalo OP
72 posts
 
Lewm yes it's the cart you sold me, it will one day be one of the few Colibris with over 2000hrs ;-) There is a XGP 0.65mv that Bas sold here a while back, the day I buy it I will send you the XCP to play with for a few months.
More to discover