Maril55 -
The verdier platine comes with an option to use a ball and thrust plate. Essentially this means the platter is grounded, and provides an energy path to ground for unwanted energy or resonance. In this mode the magnetic repulsion is still employed, but it means the tt has a high mass platter, but the grounded bearing only sees a fraction of that weight. This is a very elegant solution and is used in the Continuum. I prefer this mode, the grounding tightens and focus' the sound, increases resolution and articulation if applied properly. The weak point of the Verdier is probably the motor, and there are aftermarket mods available. The battery supply version is gutless.
In my own Final Audio the motor drive system uses oscillator preamplifiers that regenerate the power supply and provide precise sine and cosine waves to the 80wpc power amp that drives the ac motor & 20kg platter.
Micro ringy platter - if you look at the cross section of the Micro Seiki platter it looks like an upside down plate with a lip. ( upside down U ). This rings. The ringing is ameliorated by using a heavy copper mat - the combination of the 2 metals, gunmetal and copper, acts as bimetallic dampening. There are probably other alternatives to getting rid of the platter resonances - eg use of heavy polymer mats such as delrin or lexan for example.
The Micro 5000 is significantly better than the 1500/2000/3000 models and comparisons should not be used. I have never seen a failure in the Micro power supplies so cant comment on what goes wrong if anything.
The verdier platine comes with an option to use a ball and thrust plate. Essentially this means the platter is grounded, and provides an energy path to ground for unwanted energy or resonance. In this mode the magnetic repulsion is still employed, but it means the tt has a high mass platter, but the grounded bearing only sees a fraction of that weight. This is a very elegant solution and is used in the Continuum. I prefer this mode, the grounding tightens and focus' the sound, increases resolution and articulation if applied properly. The weak point of the Verdier is probably the motor, and there are aftermarket mods available. The battery supply version is gutless.
In my own Final Audio the motor drive system uses oscillator preamplifiers that regenerate the power supply and provide precise sine and cosine waves to the 80wpc power amp that drives the ac motor & 20kg platter.
Micro ringy platter - if you look at the cross section of the Micro Seiki platter it looks like an upside down plate with a lip. ( upside down U ). This rings. The ringing is ameliorated by using a heavy copper mat - the combination of the 2 metals, gunmetal and copper, acts as bimetallic dampening. There are probably other alternatives to getting rid of the platter resonances - eg use of heavy polymer mats such as delrin or lexan for example.
The Micro 5000 is significantly better than the 1500/2000/3000 models and comparisons should not be used. I have never seen a failure in the Micro power supplies so cant comment on what goes wrong if anything.