Micro Seiki, or TW AC-1


I'm trying to decide between Micro Seiki RX 5000 and TW AC-1.
They are approx. the same price used (about $10K)
Both are belt drive.
Unfortunately, I don't have a first hand experience with either of the tables.
You can see my current set-up in my system page.
The reason, I want to make a change from DD TT to belt drive is just to try a different approach.
Also, I have a feeling, that the bass would be one of the areas, where MS and TW might have an edge over my current DD Technics SP-10 MkII
My endeavor into analog is fairly new, so I'm not sure what my final choice in analog would be, unless I try it in my own system.
What I'm really interested in is the following:
Sonic differences b/w MS, TW and Technics SP-10 MkII
Reliability
Service availability.
maril555
I've had the pleasure of hearing a MS table and as Dev has pointed out the speed accuracy is pitch perfect, can't say that about many of today's tables, unfortunately.
Dev, are you saying that you can tap the armboard or the spindle on the MS table while the needle is resting on an LP and hear nothing through the speakers? If so, that would mean the platter and tonearm are incredibly inert. Very impressive. I've not seen another table pass this test.

Halcro has also commented in other threads about the speed accuracy of his Raven.
Rsf507, Do you mean to say that you can perceive perfect speed accuracy without the aid of any measuring device? (This is different from saying you have a perfect sense of pitch, which may well be the case.) With all respect, I doubt it, but maybe you had a Sutherland Timeline or similar device at hand.
Not to argue with anyone but I am really curious how relevant is the tapping test as far as airborne vibration is concerned?
Certainly if MS does not transmit any noise through the cartridge when tapping, then it is more immuned toward airborne vibration than turntable that does. However, to be immuned toward airborne vibration, how far do you have to go? Airborne vibration is certainly much much less forceful than tapping directly on the turntable. However, I feel that a turntable that failed tapping test does not neccessarily means that it is susceptible to airborne vibration. To pass tapping test, may just be an overkill in engineering or may be not! I don't really know. What do you all think?
Thanks Dev for the informed comments. They tally with what I've heard in terms of the superior speed, articulation, noise floor of the Micro 5000 v the Raven AC1.