Kuzma 4 Point owners - Do you use damping?


Hi folks,
I have a Lyra Delos mounted on a 4 Point on a Satbi Reference.

I find my left speaker woofer bouncing quite a bit more than the right speaker woofer (on the majority of flat LPs, not warped) due to subsonics, but the soundstage is well spread and vocals centered. Not that I can hear anything from the subsonics, but I find it unnerving looking at it. And I have no "subsonic-off" switch on my equipment.

I think my cartridge is mounted "precisely" as far as I could, but I have no test tool to check for Azimuth or anti-skate.

I cam curious if anyone uses the damping trough on the 4 Point arm. Will damping help?

All other advice are welcomed too.
Thank you.

PS: I used to be a Rega user, so it's fascinating that I have so many parameters to play with...
hamburger
As the Foz manual states, the actual values on the meter don't matter, just that they are matched.
Thank you guys for the confirmation on the fozgometer.

Next, i will play with the damping and report back again.
Hi,

I have almost the identical setup: Stabi Ref + 4P + Kleos/XV-1S.

No troubles at all by using both damping devices, half way down, but due to pure sound reasons!
But also without any damping the system is by far more quiet as anything else I have experienced so far. I can judge this upon digitalized records, where the Kuzma has amazingly low noise floor with and without any filter throughout the whole band Range.

Regards

BD