Audio Research VT100 MKll Stays on

Bpoletti,
That's very similar to what rednecks would often say to foreigners making spelling, grammar or verbal mistakes especially when they have nothing else to say.

Similar money back story:

A pupil who once graduated pricey private high school in London decided to claim money back claiming he did not learn anything.
Priincipal decides to put series of exams to check if that's really the case.
Every school subject he would fail: science, reading, literature, history, but at the end, in the math exam the math teacher asked him how much school has to return his money back.
Pupil expressed the amount in terms of amount per month; number of semesters and number of months per semester.
Math teacher proudly put grade A to his knowledge of math and dismissed pupil's claim.

Czaivey,touche! Same goes for Winoguy17 too!

Terry, You wrote, "I have it plugged into one of the switched outlets on my power conditioner and I'm just turning it on and off that way but I've replaced the switch twice which both times worked for a while and then the same thing"...

At first I thought you meant to say that you had replaced the switch on the power conditioner, twice, but now reading your other posts, I am thinking you've replaced the switch on your VT100, twice. Which is it? If it's the power conditioner switch that keeps failing, then it is likely that your VT100 draws too much current at turn-on and blows the PC switch. This could mean that the VT100 has no real problem; the PC switch needs to be one with a higher power rating. If it's the VT100 switch that keeps failing, then there is probably some issue within the VT100 such that it draws more than normal current at turn-on, which stressses and finally blows its switch. Simple.
In the latter case, the problem is to identify the cause within the VT100; send it back to ARC. (All tube gear will draw an excess of current at turn-on, while the tubes are heating up and the impedance of the circuit comes up from zero to normal. Many tube amplifiers use a "current inrush limiter" placed on the primary side of the power transformer to ameliorate this problem. Your problem may merely be that the CL in your VT100 is defective. Have you blown any fuses?)

Maybe you should send it to ARC to get fixed.