MC suggestions for conrad-johnson Premier 15

Hi MarK,
Thanks for you response. I am going to look at modding my premier 15 something like the link below if I dont get any info here. I think there is too much gain with that setup. It seems it would have as much output as what I currently have with my Maestro. I am going to call Jensen Monday to get some advice as they have other SUT's with less gain that might work. CJ told me the Premier 15 designed for MC and there would be no need for a SUT. Ortofon told me 53bd gain would likely be to low for the Cadenza Bronze and a normal 20-30db SUT would likely be too much.

http://www.10audio.com/cj-p15_jensens.htm

I believe you will need some additional gain for any LOMC. I'd check Bob's Devices. Lots of good reviews. I understand that his 1131 is a good match for the Bronze and 15. It might also give you a little more versatility than the Mod if you decide to change cartridges.

He's a distributor for Ortofon as well (I have no affiliation with either) and the last I corresponded with him he offered me a discount if both the transformer and cartridge was purchased from him.

Good Luck. Please let me know what you decide.

Regards, Mark

Have a look at the Benz Glider SM or Benz Wood SM - both 0.8mv output.
I have heard these working very well with a CJ TEA2SE with 55db gain, no step up transformers required.

Thank you Dover! I will look into the benz micro line.

What are other Premier 15 15/2 owners running for MC cartridges?