Ortofon 2MBronze; Quintet Red; Vivo Red???

Matt...with all due respect, the "right"
cartridge is for "you", not for the tonearm.

Yes, there are some carts and arms that have an
incompatibility issue, but if you take 20 carts that will
work on a given arm, you will likely have 20 different
responses to the sound of those carts.

Please don't get me wrong, I LOVE Dynavector carts, but
to say that the 10X5 is the right cart for the Rega P3/24
is, well...just wrong. If it's right for you GREAT, but to
make a blanket statement like is just irresponsible, By
saying it's the RIGHT (your emphasis) cartridge, you are
implying, it's the only cartridge.

Let's just say the Dyna 10X5 is "one" of the
carts to work well with this table, but there are many
others.

Matt and Mofi. I had a Dynavector 10X5 for 5 years with moderate use. I sold it because I was fearful of ot getting it trashed in transit from Hawaii to the mainland. I also mistakeningly thought that an MC wear faster and so it was time to put it on selling block

It provided very good sound over the course of my ownership. BTW, I also ran it for a while with a Musical Surroundings Phonmenon II phone pre-amp which provided greater overall smoothness. Nevertheless, I sold MSPII along with separates to make way for the Rogue Sphinx integrated amp wkich has only a MM stage. This MM stage's output was low and with the Dynavector, I had to jack up the volume to above 2 o'clock to get loud.

Mofi, I am considering an AT 150MLX MM which is slightly used and on sale. However, this design cartridge engine is vintage 1997....and probably makes a difference when compared to the newer Ortofon 2M Bronze engine. The Bronze received only OK reviews compared to the less expensive models below, but also noted that it sounded better than the 2M Blue.

Again, the issue is compatibility with the Rega arm; I was warned by several members that it would be a BAD MATCH with Denon 103R.

Will take a look also at the new Clearaudio V2 MM which is about $300.00 (n0t the V2 Ebony which is about $1200 at retail.....way way above my pay scale Thanks to all who have respomded so far.

I have always been impressed with the synergy between a Rega 3-series turntable and the Rega Exact (now series 2) cartridge. It's a little more money than what you've mentioned, but it has this "rightness" on a wide variety of material, and although MM, is well regarded among high-priced LOMC enthusiasts, e.g., Jeff Dorgay of Tone Audio. You might find this thread enlightening from Steve Hoffman's website.

Its NOT that the Dynavector is RIGHT for me!!! Many experts with expensive and inexpensive rigs all agree the Dynavector 10x5 is a excellent combo especially for $450. AND thank you Sunny for making my other point clearer that the Denon 103r is not a good match for the RB301. I rest my case !

Really under the radar ..... but the Nagaoka MP-150 is a great match for the table and arm, and a fantastic value ! I had the Exact 2 on my P3-24 for quite a while, and when the cantilever snapped, it was time for a change. I listened to the Dyna 10x5, Ortofon 2M Bronze, ClearAudio Virtuoso Wood, and the Nagaoka. Bang for the buck, the Nagaoka simply sounded the best ! Check it out .... you may be pleasantly surprised. The Nagaoka does not have the "status" name of the others, but it certainly sings sweetly on the P3-24/RB 301 set-up.