First Turntable Advice


Looking to dip my toes in with vinyl. Would prefer something easy to set-up/use, that gets me a good introduction to vinyl. At this point I have considered the Rega RP6, Clearaudio Concept, and VPI Scout 1.1. Any thoughts on these tables or any others I should be considering? I don't think I'll be able to audition them locally, so any input is appreciated.
My system is McIntosh C2300/MC352, B&W804D's, Luxman DA-06, MacBook Pro.
aubadge
The other posters will not like this advice:

If you are just starting do not spend a lot of money to buy the name.

Find a used Technics 1200 and see if you even like vinyl. Reasonably priced,very easy to set up, and not a bad table.
All of the responses you've received are valid, but I suggest you take advantage of your C2300 MC input - it is one of the very best made. Go with more straightforward table like a Rega RP3 and match it to a low output MC. I'm partial to Dynavector, and their 17D3 is a high-performance bargain. There are others in the $900 range worth considering, too. Make sure you take the time to set the cartridge up correctly, too. Patience and accuracy here will be very well-rewarded. Skimp and you will be very disappointed. Start with a good protractor.

Good luck and happy listening!
My 2 cents... good description by Pani; plus the cartridge will be a major impact on the sound.

And as far as the Rega RP3 mentioned above, I think you will be very disappointed in this budget table when compared to the fine RP6 or the VPI Scout.
Buconero 117, I looked at the site and Harry doesn't need to worry about anything.
@Lowrider - I suggested the RP3 because it is a good, basic table that maintains speed well, has no frills and can be upgraded or swapped out without serious financial consequences. Also leaves room for vinyl accessory must-haves like protractor, cleaning gear, platter mat and so on. This is a first rig and transducers make the biggest overall difference IMO, so spending proportionally more there to match with the 803Ds and the C2300 should produce a better overall ROI.

@Aubadge - I'd forgotten to mention that Dynavector is an especially appropriate match with your speakers. B&W and DV have a very strong synergy. Neutral, revealing and uncolored. Not everyone cares for that, so do your research before committing $$$. You will also need support accessories like record cleaning fluids, brushes, alignment protractor, magnifying glass and so on. These things make a very big difference in sound quality. Scope out a site like Music Direct or Needle Doctor to get an idea of just how many alternatives there are.