2. analog
  3. 1429714796

Yuour cartridge for Reed 3P "12 Cocobolo

Hello, my question is for Reed users:

- Which cartridge do you use with this tonearm in your system ?

- Which one perfectly match with Reed effective mass (18g) ?

- What is tonearm/cartridge resonanse in your system ?

Finally I got my new Reed 3p "12 cocobolo tonearm with effective mass 18g. Right now i use it with Audio Technica ART-2000 (limited edition) MC cartridge and LF tonearm/cartridge resonanse close to ideal (with my HiFi Test Records it's somewhere between 9-11Hz).

Audio-Technics ART2000 MC
9x10-6 (100 Hz,Japan)
line contact stylus
Weight 8g.
Tracking force 1.8g (recommended)

I'm gonna mount my next cartridge soon:

Argent MC500HS
8x10-6 um/nm (most likely at 10Hz, cos cartrige made for US market, but maybe it was made in Japan)
Weight 7g
Tracking force 2g (recommended)

In the future i would like to try few more cartridges, if anyone tried them on Reed please share your experience:

Miyajima Kansui MC
7x10-6 (100Hz,Japan)
Weight 10.4g
Tracking force 2.25g

Zyx Premium 4D with Silver Base MC
12x10-6 (100Hz,Japan) vertical
15x10-6 (100Hz,Japan) horizontal
Weight 7.9g
Tracking force 2g

Probably ZYX compliance is too high for Reed's 18g effective mass. Also i'm not sure is that correct to multiply 100Hz compliance on 1,5 or 1,75 to get 10Hz compliance ?
128x128chakster
chakster's avatar
chakster OP
6,144 posts
 
Thanks Doug and Sarcher
I'll screw up my lower compliance ARGENT cartridge soon to check it against a bit higher compliance AT ART-2000.

As for the ZYX without Silver Base, Sarcher, yes i owned Airy-3 before and preffered 4D Premium with Silver Base over it. Sent my 4D for upgrade anyway, don't have it now to check with Reed (otherwice i would not post questions here).
ninetynine's avatar
ninetynine
135 posts
 
Hi, i had a Delos, Kleos, AT-OC9I and now an EMT JSD6 on my 3P 12" with Pernambuco arm. No one had problems, but i think the EMT is the best match.

https://www.dropbox.com/s/3htqds5fbix8wkk/Feickert%20Blackbird%20-%20EMT.jpg?dl=0
chakster's avatar
chakster OP
6,144 posts
 
Ninetynine, it looks nice. The shape of "headshell" on my reed is different, it's not removable from the armwand, probably earlier version, looks more like Da Vinci than current round shaped reed shell. That's interesting, i'll check for EMT.
chakster's avatar
chakster OP
6,144 posts
 
Just swapped my Audio-Technica ART-2000 with vintage Argent MC500HS on Reed 3p and love the sound even better. It's something special about this very rare and almost unknown cartridge. I've been using Argent MC on Thomas Schick "12 and it was really good, but on Reed 3P it sounds much better. While the resonant frequency is a bit lover than ideal (AT ART2000 was ideal near 10Hz) i love the sound of high output Argent MC500HS. Maybe it's because of sapphire cantilever. Their stylus specify as Hyper Elliptical and on their paper sheet it's similar to Stereohydron / Fine Line / Line Contact / Long Line / Line Trace.

Anyone on here experienced with Argent top of the line cartridges ?
oscilloscopium
32 posts
 
I can only post my experience in my system that since early 2013 employs Reed 2A 12" Cocobolo partnered with Zyx 4D Gold (without silver base, 0,48 mv output).
The 2A Reed has 17 gr mass instead of 18 of your 3P model so this is not exactly the same; neverthless it seems that the matching works fine with no audible resonances.
best
Marco
More to discover