2. cables
  3. 990492297

Sakura Systems OTA Cable Kit

Has anyone tried this "minimalist" cable kit? After receiving a recommendation from someone with similar musical values to myself, and whose ears I trust, I could not resist ordering one. I will report on how they sound in a few weeks, but am interested in others' opinions too.

For those that have not heard about them look at www.sakurasystems.com for an interesting read. The cable sounds as if it is very close to the specification of the conductors in Belden Cat5. So I may have spent around 100 times what the kit is worth. We shall see.

If you have not heard this cable, please don't bother posting your opinions of how it MUST sound here. Nor am I that interested in hearing how stupid I must be to order this kit - it's my money and you are free to make different decisions with yours. Sorry for this condition, but I am bored with those that have nothing positive to offer on this site, and post their opinions based on deductive logic rather than actual experience.
redkiwi
abex
322 posts
 
I asked Audio Eng. what type of Spades he would use on this stuff?His advice seeing that it was so thin was to wrap it around the WBT Posts I have to both the Amp & Speaker's(3in.).He was correct!
Everything opened up after that.

Great advice.I was just using 1 small strand before that.I did not think about it.
abex
322 posts
 
I am going to send a few short runs off to have Cryo treatment done to see what effect it might have on it.

(I will put Eichmanns on 2 pairs of exact lenghts .One will be cryo'd and the other will remain untreated to be inserted between my DAC to Pre-Amp.

Of what I have read there shall be a difference in sound,but the Q will be will that effect be positive or negative.
hantrax
36 posts
 
I can't get my CDP to work at all either using these RCA's. Any tips? I tried reinserting, re-terminating. . . nothing. .at all.

B
nearsota
46 posts
 
I had one side working on the CDP ,but I tried myself several times to get it to work correctly .No go!

I just put Eichmann Connectors on and they work great.Sometimes my IC to my Amp goes also.I imagine it's the conntect area of the wire itself.You can try twisting the Plastic connectors to see if they get the contact.

Just get some Eichman Silver Bullets and some Cardas Solder or 4% Silver Solder and make up an IC.I made up 2 last night .One I am sending off to be Cryo'd to do a test to see if there are positive results.

BTW I did not get the Silver Bullets,I wish I had.I got the Goldplated standard types.Either way they are probably the best on the market.

Good luck!
chriskeating
189 posts
 
Hi everyone,
I'm new to this thread. I am using OTA for speaker wire and interconnect for my Flatfish/Shigaraki dac, Fi super X amp and Avantgarde speakers. I made a special set of speaker wires that is a long single run to the midrange horn and a jumper to the tweeter and another from the midrange to the bass boxes. The wire is superb. I replaced JPS in my system and other wires such as Alpha Core silver. I've made a special power cord out of .65mm OTA with a single male plug and 2 sets of power wires and 2 IEC's[like a bi wire set] for the power supplies of my Flatfish and Dac. This is also a great tweak. I will be making another power cord for the amp and a Y preamp soon. I'll keep you all posted.
Happy Holidays.
More to discover