Breaking in power cords

I went in 3rds on a Audiodharma Cable Cooker. This thing is majic! It runs a hi current sweeptone through the connected cable wether it be speaker,power, or interconnect. I even used it on my component video cables for my DVD player. Turns out that blasting your dielectric with hi current is only part of the puzzle. This is only going to stress the dielectric at 60Hz. It needs to be stressed at all the frequencies in the audio band ie: 20hz-20Khz hence the sweep tone. Ayre Acoustics makes a CD with these same principles in mind....i have not used the disc so i cant comment. I think a cooker is the way to go

I have heard, that no matter how broken in your ics, pcs, or cables, doing them, after, with a cable cooker will bring them to an even higher, descernable, sonic level. anybody on this?

Warren: I too noticed that we agreed on something. It is nto the first time and i'm sure that it won't be the last : )

Cooking an interconnect regardless of how many hours of actual use it has on it will typically improve the performance of the cable in my experience. I say that with some hesitancy as some cables supposedly respond poorly to cooking, but i think that this is more of a problem with the type of cooker used and the length it is used for.

Even after cooking the cable and placing it into the system, i find that a good dose of the Ayre Acoustics disc track 7 placed on repeat for a few days can push things just a bit further. Obviously, one can use the system as desired and just place the disc on repeat when not listening.

If i was doing interconnects, this is the approach that i would use. I have used it many times with excellent results. The difference in before and after is quite noticeable. Sean
>

Sean, it's obviously me, but playing a cd player non stop for a few days is ok? I use my Ayre Acoustic track 7, once a week. A few days 24/7?
Also, I heard the same about how some ICs can respond poorly to cooking. They can be overcooked, as well. How does one know the exact duration and strength of the cooking. I would hate for my ICs to be "welldone."

I've always turned with a wince when I've heard the suggestion to run a CDP continuously like that - of course, thinking about my high-end player. Rather than put an expensive player through such a duty cycle, it would seem to me that one would want do this with a cheap unit, second hand, hand-me-down, classified ads for twenty bucks type of player. It's been widely suggested before - for doing this sort of work, some "beater" equipment makes a good tool.