Acrolink in-wall cabling?

Mcmiller....using an expensive in-wall cable is no different than using "very good PC's". After all, they both are placed after the electrical panel. Unfortunately, debating this is a straw argument, just like comparing the high price of gas....especially when bottled water is *incredibly* more expense on a per gallon basis. A $500 power cord (presuming it's 5-feet in length) costs $100 per foot. That's 3 times the cost of the Acrolink in-wall cable!! Anyone can do the math for a $2000 Shunyata or Virtual Dynamics power cable as well.

Of course, Romex is more cost-effective, as is the Diamond Handiwire. It's patently obvious. But there are others who wish to have the highest performance possible. This is a choice, of course....it's not mandatory.

Gentlemen,
Thank you to all who have written in starting w/ Tvad. Even though I agree w/ Tvad that the $$'s could be spent wisely with helping out the Katrina Victims this is not the forum for that.
Lets not unrightly judge each other especially when it comes to preferene, thats a non winning debate. The reasoning for this question is strictly for the better option for a dedicated run. At one point there will be an inferior power source wether it be at the panel or receptacle. For the approx. 200 $'s for Oyaide receptacles and possibly even the carbon damponing plates (upon further study)using 10/2 Romex may be the way to go.
Is there a higher grade Romex without getting carried away. If money was not a problem then why not go dedicated back to the power plant? Realisticly speaking there needs to be a starting point. I feel that the extra $$'s could be invested elsewhere, which already have been.
Thank you all for your input and even more would be appreciated...Joe

Note that I suggested that it would be appropriate to use the expensive in wall wiring *after* installing a power regenerator at the panel. Otherwise whatever grunge is present at the breaker panel is only going to be more faithfully reproduced at the outlet.

I appreciate your pride in having spent a great sum for wire to place inside your walls. I just don't believe that is the best way to get pure power to your rig unless you have a pure power source. If your house is supplied with perfectly clean power and your appliances are not introducing any noise back onto the home wiring, then your application may benefit for a $4000 run of AC conductor. For the vast majority of people who take their power from the public mains, they would do better to spend that $4000 on a few regenerators like the PS Audio Power Plant and some good PCs.

Unfortunately, or may I add possibly fortunately I do not have an unlimited source of $$'s. If we all did It may have a tendency to get us into trouble. I might add that we would have some awesome equipment. Since the Acrolink is that expensive, I have not nor will be purchasing it. Just wondering if there is a better solution than just Romex at a blue collar dollar. Thanks again...Joe