Dedicated Lines and Wall Boxes


So, I've read up here on how to run dedicated lines, but I have one remaining question. Do people run the individual runs of 12-2 cable down between the same wall studs and use a multiple-gang box, or is it better to run the cables down seperate wall cavities and use seperate boxes?

Thanks,
-Marc
mre2007
Albert
Can I sidestep you for a second with a question regarding cover plates?I need a 3 gang BRASS DUPLEX cover plate to replace the existing and damaged one on my Tice Powerblock?Any ideas for a source to buy one?
Thanks
George
George. They should be available, I've seen them at Home Depot.

A quick search using Google I found these,

brass covers

If not exactly what you want, a search or two should find them.
Albertporter:

I would greatly appreciate any comments you could make on my layout. I have an electrician coming next week, and I am not sure where to put the dedicated lines.

Here's a few options:

option #1
option #2
option #3

Thanks!
-Marc
Marc, are you asking about room acoustics so you can place the electrical to match or what?

I am no expert on acoustics. I had a lot of help with my room. I did get one piece of advice that seemed logical and everyone could try at no charge.

While sitting in the preferred seat and speaker placed in ideal spot (I use George Cardas formula) have a helper slide a full length mirror along the wall.

Every place you can see the speaker from your listening chair is a reflection point.

Now granted that does not give you a formula to treat the room, but If your going to place absorptive panels along a wall, they should be in a spot where they stop that first reflection.

As for electrical in general, is the room under construction? If so, I would add as many lines as possible. They are CHEAP when the room is open and a pain in the butt later on.
Albert - I never thought such a simple question would lead to an unnecessarily harsh response. I hope I am just misreading it. Of the hundreds of posts I have read (out of the probable thousands for sure), much has been written, but little that actually provides a clear explanation regarding my question above. Everybody seems to assume these things; I am simply trying to find out why. Perhaps, instead, you could help by directing me to a post that addresses this if there is one, because I cannot find it.

More specifically to your reply, what if isolated outlets are used in a steel box? Then the grounds wouldn’t be shared…right? As far as the countless threads, doing searches on “preferential grounds,” “isolated grounds,” and “dedicated grounds” all yield “no matches.” Yes there are many threads on dedicated lines (like this one), but they don’t address my questions, which is why I thought it was appropriate here. The magnetic part of the question is also still obscure to me. There are no complicated parts inside the outlet box and no music signal, so how does a magnetic field there affect the sound, and is there actually a magnetic field in the box? I am sorry, I just cannot seem to find the answers/explanations to my questions and I HAVE spent much time reading other totally redundant posts/threads.

Marc - your room is very similar in dimensions to my daughter’s bedroom (13x12x8). Her room, even with a bed, desk with books, bookcase with books, lots of stuffed animals and so forth has horrible ringing and echo. Overall it is very loud, noticeably so. Meanwhile, the other bedrooms in the house, with different dimensions (smaller and larger) and even less absorptive and diffusive objects in them sound much better and quieter. The effect really is dramatic. I see you have acoustic treatments planned already, but if you have not already done so, perhaps finding a qualified acoustic consultant will speed your time to full enjoyment. It is amazing what an experienced acoustic guy can accomplish with little investment.