2. cables
  3. 1141175762

Break in for ICs from CDP

Just refresh me guys. I know the cdp has to be playing and the ICs have to be hooked up to my integrated. I was told, however, my integrated need not be on. I believe that is the deal, but I have brain lock. Also, any tips for IC break in. The manufacturer says these babies will need 250 hours. They told me my integrated need not be on. Just want to check with my fellow audiophools....
thanks in advance, warren :)
128x128warrenh
Post removed 
sherod
1,690 posts
 

Ooh, sorry,Tvad. I wasn't aware that Warrenh had gotten another Cdp. I just read where you put your above question post in the CLC thread and you mentioned something about putting the cork back in the bottle, so,well,...
warrenh's avatar
warrenh OP
2,299 posts
 
Tvad = off
nsgarch = on

Man, I thought I would get something a little more definitive. I'll have to search the archives, I suppose. thanks guys. peace, warren :)
bpwalsh
1,202 posts
 
Anyone wanting interconnects or digital cables broken in is welcome to send them to me to be broken in on the MOBIE break-in device I have here. The MOBIE (Maximum Overdrive Break In Engine) puts a 15V 1 kHz square wave through your cables, which has been proven safe for all done so far (check with your cable manufacturer if any question). Your only cost is shipping both ways and one of your best live CDs for each. I will break them in for five days or thirty days, your choice. There's very little in it for me other than the good karma that comes from offering this service to fellow audiophiles and music lovers...
mapleleafs3
190 posts
 
common sense says music through it
More to discover