back to your original question, I have a hypothesis(not a theory) on why a power cord would affect frequency response.
1)Almost all well known audio component manufacturers pay special attention to their power supply with their flagship products. The topline normally differing only in the power supply and delivery to their second in line.
2)Almost everyone also recognises that transformers and filter caps play an important role in the final sound and these falls within the power supply section as well.
3)I believe that human hearing is more sensitive to phase differences than tonal differences.
4)Given that any conductor carrying a current is going to generate a lateral motion in a magnetic field, capactance and inductance is inevitable.
5)In any pc, it is relative straight and would vibrate, the vibrational and dampening aspects plays a huge part in its sound, the same with tranny or caps. Not to say that the type of the conductors or the shielding does not matter, but I believe that vibration tuning plays a significant part.
6)the same pc's sound different in different setups because they are placed differently(coiled, draped on lifts, on the carpet etc) and hence their vibrational aspects are affected.
7) I divide pc's into 2 main categories, modifying and neutral. eg, elrod vs cardas. modifying cords affect the sound whether they are at the breaker or just before the component. I use both types, which you prefer depends on your biases and your overall system sound.
8) Other aspects such as geometry, guage, shielding, material, dielectrics, conductor cross sectional shape, length, connector types, termination, treatment, conductor state(liquid vs solidvs amorphous), length etc is left out for another day in this post as they do matter as well.
regards
1)Almost all well known audio component manufacturers pay special attention to their power supply with their flagship products. The topline normally differing only in the power supply and delivery to their second in line.
2)Almost everyone also recognises that transformers and filter caps play an important role in the final sound and these falls within the power supply section as well.
3)I believe that human hearing is more sensitive to phase differences than tonal differences.
4)Given that any conductor carrying a current is going to generate a lateral motion in a magnetic field, capactance and inductance is inevitable.
5)In any pc, it is relative straight and would vibrate, the vibrational and dampening aspects plays a huge part in its sound, the same with tranny or caps. Not to say that the type of the conductors or the shielding does not matter, but I believe that vibration tuning plays a significant part.
6)the same pc's sound different in different setups because they are placed differently(coiled, draped on lifts, on the carpet etc) and hence their vibrational aspects are affected.
7) I divide pc's into 2 main categories, modifying and neutral. eg, elrod vs cardas. modifying cords affect the sound whether they are at the breaker or just before the component. I use both types, which you prefer depends on your biases and your overall system sound.
8) Other aspects such as geometry, guage, shielding, material, dielectrics, conductor cross sectional shape, length, connector types, termination, treatment, conductor state(liquid vs solidvs amorphous), length etc is left out for another day in this post as they do matter as well.
regards
