sivler interconnect

I and lots of others disagree heartily with Mrtennis's characterisation of silver-conductor cable (SCC). While the sound of SCC is as variable as many cables made of copper conductors, in fact, other factors being equal, silver is a slightly superior conductor and cable made from it will sound cleaner and less characterful* than copper-made cable. In the 2 careful (and exhausting for me, as I'm no GEA and I have to WORK to hear subtle differences) comparisons of IC I've done, SCC has sounded cleaner, more transparent, than copper-conductor cable. I have solid-SCC throughout my system; my system does NOT sound timbrally inaccurate, instruments do NOT sound unreal, bad recordings do NOT sound worse (they simply sound the way they sound), and the sound of my system is not at all annoying. In fact the sound of my all-silver-cabled system continues to improve, and it's the best-sounding system I've ever had. (I'll not comment on Mrtennis's use of the term 'analytical', as I have no idea what that means.)

PS Audio is now selling its new Xtreme Resolution ICs. The 2 cables are apparently identical except that Reference is made with VERY-high-quality copper and Transcendant with silver conductors; see http://www.psaudio.com/products/xstream_resolution_audio_overview.asp . Read what JerryS of 10Audio.com has to say about them here http://www.10audio.com/psaud_ref_trans.htm .

Personally, I don't choose IC or speaker cable on how it 'sounds', so I don't look for a 'warm' or any-other-sounding cable. My goal is cable that has no sound...no character...of its own. If your system sounds a little thin, I suggest you replace or retune whatever components are creating that lack of richness. In my experience, it's almost always the speakers and/or room.

* and, after all, most of us want our cable to have NO character whatever.

I use AZ Silver Ref MkII from source to pre and Matrix Ref MkII from pre to amp. This achieves a nice balance of resolution and warmth. However, using 2 Silver Ref cables, I personally would not recommend. But if you want warm, yet detailed, consider AZ Matrix Ref MkII. Hybrid copper/silver interconnect. If you find that to be splashy, which I doubt, try some Audioquest cables, like Jaguar or Panther. Little darker sounding, but if you like that, these'll do. Good luck.

i like this dialogue. thank you gentlemen for your insight.

i will describe my components shortly.

if i listen to 5 pair of silver cables and describe the resulting sound as i have alluded to, and then change to a particular cable and the sound changes, what does one make of that.

if i can identify silver cables whenever i hear them in my system or that of other systems, i allege they have a character and are not neutral. i believe silver cables are not neutral.

they portray the sound of instruments in a way which is less credible than when using a variety of copper or copper/gold cables. this is my perception of silver cables.

i have auditioned hundreds of stereo systems, many of which used silver cables and the result was not pleasnt. with such a track record of evidence, i stake my claim.

now to my system and preferences.

i have quad63 speakers, a houston 50 watt tube amp aand vtl deluxe 120 amp, a maple tree pr3eamp (6sn7 from Canada), i have an audionote cd2 tube output stage cd player, a cal labs alpha and delta, legenburg line cords, dcca interconnect, speaker cable and line cord, soundstring interconnect and line cord, sunny cable technology interconnect and line cord, solitone speaker cable sound fusion sound boosters anti resonant devices under components, ps audio ultimate outlets and juice bar.

yes it's a hodge podge with more than one set of cable.

i like a vintage tube sound, specifically, attenuation in the treble, past 3khz, a very distant perspective and a slightly ripe uuper bass, lower mids (a slight boost between 100 to 200 hz).

my system is , scd1 sony , trisita 21 dac , A3.2 amp and preamp musical fidelity, 927 be jm lab , all interconnect straigh wire serenade and one pair kimber kcag , i do not like kimber kcag , i found they are so bright cable in my system , now im looking crescendo interconnect to use them between amp and preamp , or i can look for another brand , my buget is 300 - 500 for 0.5 metter , please give advice, thanks