My system is bright? I need help. thanks

Since you have tried various speaker placement and the brightness is still prevalent, it's down to the electronics. The synergy between your speakers and the Musical Fidelity amp, in my opinion and some others, is the culprit. You can of course try wires since they are the cheapest solution, but if you could get someone to loan you a Krell or McCormack amp(noticed a few users who drive the Andra with Krell FPB's) then the much better since you would then be able to know how your speakers would interact with the right electronics, or vice versa. You can check out users who have similiar speakers here in their virtual systems and get some opinions from them.

I was in a dilemma once as there was a mismatch between my amp and speakers, and I have to choose which one to go despite my initial intention to keep them both. In my case there was too much warmth and I wanted more detail and transparency. Eventually I have chosen my amp to stay and got new speakers. FYI I have tried cables in an attempt to salvage things too but in the end figured out a *component* need to be replaced.

Good luck in your cable marathon......

Tvad, The problem in trying to help Scientist73 is fundamentally we don't have a basic undertanding of his room. We don't even really know its dimensions, we don't know where his listening position possibilities are, ad infinitum ad naseum.

I think a major factor which is not being considered is that these are 3 way speakers and I doubt they were intended to be used as 'nearfield' monitors. My last speakers (before Tylers) were a three way system using Dynaudio drivers, much as the Andrea's. When you listen in the nearfield the tweeter predominates the sound as the tweeter is closer to you and it has not really blended with the mid and woof.

I would guess that these speakers would sound best if the drivers were about 9 to 10 feet apart, the listening position was 10' back and the speakers were 4 to 5 ft from the wall behind them. By crossing the axis of the speakers as I suggested earlier you can actually get close side wall placement, there is no sonic downside to close sidewall placement other than these reflections.

Unfortunately we do not what is even possible. I suspect that he has room set up limitations, or he has some asthetic limitations, or sonic predispositions, which he has not told us about.

But, Scientist73, you would not be the first person to discover the hard way that buying highly regarded equipment and plunking it down in a room that it sounds poorly and then tries to patch it together with different stuff, without understanding and attacking basic set up issues first, and ultimately after gaining an education the hard way (money and time wise) ends up essentially starting from scratch. Been there, done that! I think many of us have, especially us set up freaks. :-)

FWIW, Scientist73, time to start getting analytical about your problems. There really is no quick cure for your problems if you really want to get the value out of your present equipment. If you really want some help from this forum, take a moment to provide a concise description of your room, its openings, its furnishings including locations of windows, furniture, etc. Just put it in words with descriptive descriptions. We can draw diagrams in our minds. There are some very knowlegable set up folks here who can help, but everyone is presently shooting in the dark in trying to help you.

FWIW :-)

Guys. i can send you an accurate layout as an email attachement i can have it ready by tomorrow with all dimensions and everything.
But to what email to send the attachement to.
I tried to do here but it si onlt test message. i can even take pics and send it.

let me know
thanks