Home Depot Ext. Cord for Speaker Cable

I have a pair that I sometime use. Mine are "Commercial Electric" branded from Home Depot. It is the orange cable with thick black line running the length of the cable.

I connected the black and green wires on both ends together and use it for the (-) side. I use the single white run as the (+) side. It sounds pretty good and only cost about $15 for the experiment.

Enjoy,

TIC

I played around with several variations of this "Halloween" cable before settling on one that I'm still enjoying after more than a year. I use the stuff shotgunned -- all three conductors in the forward/+/red direction and another three in the reverse/-/black direction, terminated in serious spades at the amp end and Eichmann bananas at the speaker end. I've encased the cables in black Techflex so they doesn't scare the children. And I'm using two more identical pairs into the bottom (subwoofer) connections on my Gallo Ref 3s.

Works for me, and replaced some pretty pricy cables. One of my friends found that they sounded substantially better than the $1200 cables (which will be unnamed but starts with "V") he was using at the time. Another friend thought they sounded like hell in his system. So it's a system-dependent crapshoot, but what's to lose -- for 20 bucks you can make up 4 8-foot links and have some to spare, and see what you think.

BTW, the bananas on mine are so I can switch polarity easily (well, comparatively easily).

Tried it, liked it, it's reasonably neutral and clean. Eventually like any good audiouphile I tried other cables, finally purchased and kept the Audio Art speaker and IC cables which made a very nice and very noticable positive difference in my system. I am currently using the Home Depot in my Home Theatre set up, where it sounds great.
So, for me, it was nice, not terribly "refined", and teh Audio Art was much more "musical", and not very expensive.
Try them - they have a return policy, but I bet you won't return them.
But Bob is right - try teh Home Depot too - for 10-12 bucks, whatchoo got to lose?
Enjoy!
James

The third wire could be combined with your Negative cable, it then has a thicker gauge to ground.. Will it make a huge impact on sound, probably not, but you can at least use the copper on hand.. It will not hurt it. I have actually opened many speakers up that use a thicker gauge wire to the negative terminals for a path of lesser resistance, the positive can stay thinner.. Again not saying it is necessary, but you can at least use the wire.

I tried the variation Undetow recommended, liked it better than the "original" two wire version, but not nearly as well as the separate ones I ended up with.