Synergistic New Tesla Line...Any comments?

Guys, I know the SR states on their site that the material the powercell is made of is resistant to scratches, but be careful!! I was so careful with placing mine in my rack due to the piano finish but mine lightly touched the hinge on my Salamander stand. The chassis itself is not scratched but the side of the faceplate is. Even though it is a small scratch it is a total bummer. So I just wanted to put it out there to the rest of you guys to be extra careful.

Tbg, I do have a hologram on my CDP. And a Hologram A on my integrated amp. I precision AC work best on a power conditioner or a large tube amp.

Rydenfan,
Only the chassis surfaces that first must be CNC cut and machined are coated- before the CNC process. Sadly it is not possible to coat the edges after the CNC process as the coating process is highly involved and must be performed on the sheets themselves which are then hung vertically and dried in a climate stabilized, dust free and emission controlled environment.

Yours in music,
Ted Denney III
Lead Designer, Synergistic Research Inc.

I just posted a review of the PowerCell 10 and SE version.
It is listed in the Product Reviews under Accs-AC Filter

Ozzy, my thoughts entirely follow what you have said here, save that I had no experience with the PowerCell 10 Standard. My 10SE was good out of the box but much better the second day. Each of the SR power cords also showed a one or two day break in.

I too have unused dedicated circuits.

The 32 amp connector turns to snap into locked position. The lock will be at the top of the plug when locked.

I posted this on your review also.