Synergistic New Tesla Line...Any comments?

Adwiegert, I have been experimenting with MIGs under my amp also. What really shocked me in the SR demonstrations at CES was their using them on the StillPoints rack. I was surprised that there would be further improvement on that rack, but there certainly was.

My amp was already on a StillPoints component stand, so I could not use the MIGs on this four amp stand. I put a glass shelf from my Mana stands on the component stand and added MIGs in the pin point configuration. With the MIGs was somewhat better. I decided to just use Mana stands including the same glass shelf and with the MIGs on top. Initially I thought this was about the same. But I was forgetting about the time it takes for the MIGs to settle down.

The next morning the Mana stand with MIGs was clearly better, but I had to go back to the component stand and let the MIGs settle down. By that evening it was quite clear that the StillPoints component stand with MIGs was clearly better.

One final development. I had never tried the ambient setting of the MIGs. All other MIGs were also in ambient setting. In my system at least, the ambient setting on the StillPoints stand was best. I did briefly try it on the Mana stand, but the sound stage just was as involving and real.

I have no real idea why everything in ambient works best, but for the time being I just going to listen to music.

Regarding the Powercell 10 SE, when putting mpc's in the bottom outlets, how much will the powercell 10SE need to be lifted for the mpc's to fit tale down with some clearance on shelf? Would the miggs lift the unit high enough???

Regards Bacardi

Bacardi, the body of the MPC would clear but the leads going to the cables would defeat the function of the MIGs as they would be tightly twisted to make the turn outward.

Quick question on IC EM cell units. I have Apex IC (single end) between my DAC to my Intergrated amp (ASR Emitter II). There are a few variants of the IC Cell units, source to pre or source to Integrated amp. I plan to get new Apex IC with XLR/Cells unit which then will give me the choice of hooking it to usual balance input on the preamp section or directly to the amp section, using digital variable output on the DAC, bypassing the preamp section all together. I am not sure which route I would choose as I need to experiment with both before deciding. However, now I am not sure which IC Cells I should get and how much would it make a different if I pick source to pre vs source to intergrated. Berkeley DAC recommends bypassing preamp so that might be the way I want to go but I may also be changning from Berkeley to something else again

Has anyone compared powercell 10SE to Dimitri (Running Springs Audio)?

I had the Dimitri in since Feb 22, still sounds lean but great in every other aspect. But I am not sure I can live with lean. I 'heard' the powercell 10se may be lush which is what I am looking for I think. Maybe Dimitri shows how my stereo really sounds. Teajay are you there? I am wondering if you tried that comparisoon (Powercell v Dimitri), you had good things to say about Dimitri.

System spendor sp1 spkrs, transparent super cables all around, levinson 27.5 amp, Audio research sp9 preamp mark 3, sim andromoeda cd player, linn lp12 ittok shure v15 type 5 mr cartridge. Records sound more lush than my cd player, but maybe due to ittok arm (midbass bump?).

Good things about Dimitri, tonal purity, dynamics, detail, clarity. Some recording are just not well balanced I am finding out.

Now here is the issue. If my stereo really sounds this way, so be it. Its the old truth versus beauty argument. Thanks for reading.