Bi-wired vs Single Termination

If you choose to go bi-wire: Use a cable that has two discrete pairs of conductors(full length) or two separate cables. You will gain nothing with regard to sound otherwise. Adding another pair of connectors to a single pair conductor cable is a waste of time. All you're doing is replacing the jumper with more wire that way.

03-23-08: Rodman99999 said:
"If you choose to go bi-wire: Use a cable that has two discrete pairs of conductors(full length) or two separate cables. You will gain nothing with regard to sound otherwise. Adding another pair of connectors to a single pair conductor cable is a waste of time. All you're doing is replacing the jumper with more wire that way."

I've wondered the same thing about this practice. Have you ever seen a study of this? Due to the low impedence at the amp, will the cables shunt the feedback back to the amp, away from the crossover, better than a jumper? (The jumper doesn't shunt anything and actually becomes part of the crossover).

I don't know, I'm just wondering and can't find anything reliable about the subject.

Dave

Dcstep- You're correct: the jumper is just a connection between the high and low frequency sections of the crossover. Here's a short treatise on the subject of bi-wiring(as well as active and vertical bi-amping): ( http://www.soundstage.com/synergize/synergize031998.htm)

Rodmann thanks for the link and to all for the opinions. I am going to try the biwire. Now I just have to find a used set. During the course of this thread the volcanos and mont blancs both sold.

Expand your horizons and look for either WireWorld Eclipse 5 or Kimber BiFocal XL as well. Both wonderfully transparent cables. Happy listening!!