Cable elevators - conventional wisdom wrong?


Reluctant to put any considerable money in them, the reasons for using cable elevators seemed intuitively correct to me: decouple cables mechanically from vibration and insulate them from the carpet's static. I have therefore built cheap elevators myself using Lego building blocks. (Plastic with a more or less complex internal structure; moreover, there is enormous shaping flexibility, for instance you can also build gates with suspended strings on which to rest the cables)
In their advertisement/report on the Dark Field elevators, Shunyata now claim that conventional elevators are actually (very?) detrimental in that they enable a strong static field to build up between cable and floor causing signal degradation.
Can anyone with more technical knowledge than I have assess how serious the described effect is likely to be? Would there, theoretically, be less distortion with cables lying on the floor? Has anyone actually experienced this?
karelfd
Samuel, I suspect that most any manufacturer could or would claim that their cable risers were developed "from sound theory." I guess sound here has two meanings-well based and sounding good. I assume you mean the former. If so, what is that theory?

About five years ago, I made or bought some 25 different types of risers. I folded cardboard into triangular shape with notches for the cables. I had chopsticks with twistems around their centers. I had glass blocks and glass isolators found behind at power substation as well as ceramic ones also found there. I had ceramic tiles with two angled together and held into position on a wooden base. I made sting supporter and monofilm supporters with wood supports. I made risers out of maple, walnut, pine, oak, and even some with ebony tops. I tried china cups, earthenware bowls, stemmed glasses. I got tall risers made of the material that chips are or were shipped in. I bought ceramic entirely dark brown Suspenders from Rightway Audio shaped like electrical isolators and from a surplus isolator site in Iowa defective 18K volt 15" tall isolators with lead bases. I don't think I tried jewel boxes, but I did have plastic cups and paper cups. I use one gallon milk bottles with their top cut off. I am probably forgetting some of my attempts. All of these were, of course, without any "sound theory," just shots in the dark.

Everyone of these help over having the cables on the ground, but one stood out, the Rightway Audio Suspenders. I think they are out of business now and I have never tried the present company making such ceramic isolators product.

I must say that I bought Combac speaker wire wooden supports at a later date, which were nice under my speaker wires,but they had to be on top my Suspenders. I do not see these feet on the Combac page now.

I will just turn further experimentation over to younger audiophiles and enjoy my Suspenders.

There is no need to repeat info already in plain view on our site, nor is this the proper forum for manufacturer tech, marketing or sales info. For those with any real interest, we're easy to reach and reference. The products and tech are all well enough explained and any lingering questions can be easily addressed with an e-mail or phone call.
Today I replaced the 3 Shunyata Dark Field elevators with 2 CD cases under my speaker cables as suggested by Ted. I am using Tesla Apex cables.

All I can say is WOW!! The CD cases were much better sounding. The Dark Field elevators are dark sounding with a closed in high end and muted high end transients.

Ted, you never cease to amaze me!

Steve
CD cases are better..at least no blunting of transients or opaque artifacts.
OK, how do I set up these CD cases? In a t-pee position with cables on top balancing off the floor a few inches? OR am I placing the cables in the fold as if the case was open on the floor ready to put a CD back into it for storage. Anyone have a picture they can send me of how this looks? ...THANKS! Joe