Interconnect cable upgrade disapointment


I have recently upgraded my Audioquest Topaz XLR interconnects from my amp to preamp and from my preamp to my CD player with Audioquest Cobra XLRs. I was expecting to hear a substantial difference based on the significant price difference between these cables but I hardly noticed any difference at all. If I need to break in the interconnects to have an apples to apples comparison I would appreciate tips on how to do so. Currently, I have a CD playing on repeat. How long will the break in period take and can I expect to observe a substantial difference? Your help would be greatly appreciated.
papajoe
First impression is usually correct. If you don't notice immediate difference when you changed something, there probably was little or no change. If there is a slight change in nuance that can be noticed only with extended listening, then you'll need to decide whether the change is worth the cost of the new gear.

I have different philosophy with swapping cables than swapping components. Swapping cables is more like a tweak, or something fun you can do on the side. I would first start swapping cables with friends and establish a baseline as for what kind and how much change can be expected. Going to different brands is usually more noticeable even at the same price range. Change in the speaker cables is usually more noticeable than change in interconnects. If you are rather skeptical or don't find the whole process fun, I would recommend saving money and upgrade other components instead.
Whatever you paid for the cables seems to me to just be tuition for a good lesson - that if the people posting who have scientific backgrounds point to the lack of proof of any meaningful gain from a product, and if the only place that does point to a meaninful gain are the manufacturers - while the non audiophile community pretty much looks at the justification as on par with aliens, ufo's, and the Yeti (which they do) then there may be more to that viewpoint than to the "it just sounds better" viewpoint of those who are selling the product or who are trying to justify their purchases to themselves.

It should just be common sense that the 'break in' for cables is just more of the same, kind of like warming up the ouiji board for better spirit contact because it takes time, depending on atmospheric conditions, to form the invisible ectoplasm pathway. Of course, the tuition has only been well spent if the lesson has been learned.
I reciently put in a set of tara labs rsc2 interconnects between my cdp and my preamp. i had some htp pro xlo wires in the same place before. I was a bit upset when i didnt hear much of a difference. so i thouht i will just put the xlo cables back in and sell the tara labs ic . Guess what happened. I put the old ones back in and it sounded awefull. i stuffed the tara labs back in and had the quality sound back. It was night and day. Some times i believe you should go the opposite direction to really feel a difference. try that a nd see what happens. kevin
Musicnoise, I'll be eager to read the results of your blind testing on your speaker isolation bases you plan on building (I'm sure you'll be posting it here)!

http://forum.audiogon.com/cgi-bin/fr.pl?cspkr&1221925281

Seems any of us can be a bit inconsistent; after all, what evidence scientifically do you have that your home made isolation devices would result in improved sound over speaker spikes (In fact, I don't recall seeing much of ANY scientific studies on the efficacy of speaker stands)? Maybe you'd better start ripping on the speaker stand makers while you're at it. They're probably a bunch of crooks too. Maybe those sound isolation devices, and room tuning panel guys as well...

I'm thinking you'd have a really tough time distinguishing between the sound of your speakers in blind tests if they were set on spikes, carpeting or your supports. But, hey, if you believe your spring box device will work, GO for it!

You'd better watch that you get the absolutely correct rubber and wood; we wouldn't want a botched job due to poor materials!

It seems we all have our prejudices based on presumption. You presume cables cannot have efficacy, but that rubber and wood boxes do. And it's all happening in your head. Amazing what we can believe! :)

We don't really care to entertain any reports from you about improvements on the sound of your speaker springy things, or whatever you want to call them. We want real science. Your anecdotal report would be more akin to support for Yeti or UFOs! Really, I didn't think you were such an anti-scientific guy.

Sorry if I've been a bit sarcastic; couldn't help it. You're just a bit over-aggressive in this matter and someone has to call you on it!

Flyin2jz, it's amazing isn't it when you actually do the comparisons and hear it. No major scientific tests needed. The ears can tell quite easily the improvement. Yea, even "night and day."

One thing that is becoming clear to me through online discussions is that virtually no one has actually conducted comparisons between suites of cables. It seems that typically one cable is changed, one power cord, etc. No wonder so many give up or conclude cables have no effect. Between so-so systems, hearing problems, playing solely in the lower price brackets and similar constraints it's falling into place why people reach the wrong conclusions. Not to mention stubborn refusal to try based on distrust.

Now, I'll be very sincere. Musicnoise, I believe your home made box WILL work; it will make a discernible change in the sound. I do not think it is a foolish idea; however I do believe you should incorporate spikes with it for the ultimate isolation effect. I sincerely hope you will enjoy the difference, and I believe that you will hear it. Unless you will conduct actual blind tests, all you will have to show for it is the same anecdotal evidence persons like myself offer, which you have been mocking.

So, trust me, saying that cables make a difference isn't nearly as crazy as you think. Soon you may be joining us, albeit from the isolation device perspective.
Douglas schroeder: As to the reduction in vibration - I did not state that I was trying to improve the sound - you seem to have assumed that. What I did state was that I was seeking to reduce the transmission of energy caused by the floor - speaker interface. My reason was, not to change the quality of the sound, but to cut down on the inefficiency caused by loss of energy through that interface.

However, the arguments proposed for cable improvements do not rest in scientific theory, at least not scientific theory that has application at the frequencies and current levels present in home audio.

Seems like I have touched a nerve - do I detect one with a pecuniary interest in cables? And no, I won't be joining you on the cable adventure - I have heard the cable argument for going on 20 years and it is as meritless today as it was 20 years ago.