cables for apogee duetta II

I used the Goertz MI-1 bi-wire cables with a pair of Duetta IIs some years ago very successfully. They replaced Kimber and Symo cables and worked great with no Zoebels. A friend with some pretty expensive MITs came by and they were very poor on my Duettas. Zoebels can help with some amps not as well designed as the Pass I was using. The Zoebels are not "another compenent soldered on in series/just another veil". They are in parallel and dont affect the signal to the speakers. Read the very old white paper by Nelson Pass on his web site or look up some old posts by Sean. I bult my own Zoebels later on a dual bannana using much better caps and resistors than is truly needed.

For ICs I use VDH The First. Detailed without being bright. Disclosure, I was a VDH dealer for Sumiko in the past and after a lapse of 15 years I am a dealer for Bluebird, their current importer. But I used them when I was not a dealer and bought more on Audiogon.

As stated a Zobel network is a benign and proven method of preventing problems to solid state amplifiers that low inductance cables may present. It is not a "band aid".

Speaking of which Joe, what is the purpose of the resistors, capacitors, inductors, gerbils, etc. inside those secretive little black band aid boxes attached to the cables you sell?

Pot, meet kettle.

ROTFLMAO

I have Duetta II, Mk II - I use Nordost Blue Heaven, and like the combination. I am using an active crossover.

Here you go Ekchrist:

http://cgi.audiogon.com/cgi-bin/auc.pl?cablspkr&1240882050&1&3&1&