Thanks for your review. I'm glad that you are liking these new Shunyata VX cords. I started with the original Taipan and liked it very much on my ss preamp. I sold it eventually to upgrade to the Taipan Alpha version and wasn't very impressed. I then decided to change out electronic components and tried other power cord lines. Because of my lack of enthusiasm for the Alpha version, I hesitated in trying out the Helix when it came out. Now that you've shared your great enthusiasm for the new CX version, I might just give Shunyata another try. I'd appreciate hearing your impressions of these cords after a few hundred hours of further conditioning in your system.
Shunyatas New CX series
I looked for the thread where someone inquired if anyone had heard the new Shunyata power cords, but it's gone. Hence, new thread.
In the last 3 weeks, I've purchased the Python CX and then again, I got a new baby -- Viper CX.
As I said in my other post, there's no distinction between Alpha and Helix lines. It's two (slap), two (slap) two cords in 1 (apologies to the old two-mints-in-one commercial).
As I also said before, I wasn't expecting to hear a noticeable difference. BUT. BUT. I did.
Already covered the lowering of grain so that a fine mist - or grain - in the soundfield, is gone. What was the Python.
Having had to endure the Viper CX that came in 10 minutes ago on an Arcam FMJ22 while awaiting the Antique Sound Labs Flora premap's arrival, I wasn't expecting much. Got it, though, and right off the bat. Now, you may say, well, it could sound "exciting" because it's cold. And in other circumstances, I might agree. But I've had every generation of Shunyatas and none, out of the box made me cock my head like a dog who hears something nobody else can hear.
Even on the Viper (and I prefer the more expensive cords because, lets face it, they put more into them), the dynamic jump was obvious, the grain lower and more fluid--just like the Python. Obviously, I'm not going to make up stories about how the soundfield expanded: it's 10 minutes old, dummy! Like I should know from that?!?!? Suffice it to say, for $700, it made me take noitce in a way that my older Python Helix Alpha and VX didn't themselves do, right out of the box. I use the lazy ear approach: pay zero attention and see if your attention is captured despite yourself. I'm not yet captured, but I'm sure snagged. I think Shunyata surpassed their old bugaboos: a slightly soft upper midrange and lower treble (those hits on triangles not only lacked punch, they lacked transient bite and, even more, shimmer). Can't tell about the shimmer now, but I'm taking the day off work. I'm snagged ENOUGH and that works for me. '
I'd recommend starting with a Viper, because I KNOW you'll hear it, and if you can hear it from the lower cords in the range, you can expect jumps from the higher ones. One Python and One Viper today: 2 more Pythons in a couple of weeks (there goes the summer vacation in Ibiza, but given the medical things happening, I'll just have to use my imagination when I'm listening to Chabrie that I'm in sunny Spain or on Ibiza. I think with these cords, I could fool myself [don't worry, I've have the fan on to simulate the breeze]).
Try these out guys. I'm using Ushers, and driven by ASL Hurricanes and the Cambridge Audio 840C with transparent interconnects/speaker cable. (yeah, yeah, stifle yourselves. I have Shunyata speaker cable and interconnects too, but this is what's in the system at the moment and I'm HIGHLY analytical. Never change a compoenent during a controlled experiment)
Oh, one more thing: the tonal quality of groups has improved in the new iteration of cords: brass are a LITTLE golden, strings silvery, and on Balalaika, I actually heard more of the body of the instrument, which is to say, instead of just strings, there's more texture, so it doesn't sound like it could just be a guitar. Quite a jump in the line's resolution, especially the low-level resolution...Maybe it's the midbass-to-lower midrange dynamics, which SEEM more powerful. OR maybe it's the fumes from that Rogaine I just put on my scalp ...
In the last 3 weeks, I've purchased the Python CX and then again, I got a new baby -- Viper CX.
As I said in my other post, there's no distinction between Alpha and Helix lines. It's two (slap), two (slap) two cords in 1 (apologies to the old two-mints-in-one commercial).
As I also said before, I wasn't expecting to hear a noticeable difference. BUT. BUT. I did.
Already covered the lowering of grain so that a fine mist - or grain - in the soundfield, is gone. What was the Python.
Having had to endure the Viper CX that came in 10 minutes ago on an Arcam FMJ22 while awaiting the Antique Sound Labs Flora premap's arrival, I wasn't expecting much. Got it, though, and right off the bat. Now, you may say, well, it could sound "exciting" because it's cold. And in other circumstances, I might agree. But I've had every generation of Shunyatas and none, out of the box made me cock my head like a dog who hears something nobody else can hear.
Even on the Viper (and I prefer the more expensive cords because, lets face it, they put more into them), the dynamic jump was obvious, the grain lower and more fluid--just like the Python. Obviously, I'm not going to make up stories about how the soundfield expanded: it's 10 minutes old, dummy! Like I should know from that?!?!? Suffice it to say, for $700, it made me take noitce in a way that my older Python Helix Alpha and VX didn't themselves do, right out of the box. I use the lazy ear approach: pay zero attention and see if your attention is captured despite yourself. I'm not yet captured, but I'm sure snagged. I think Shunyata surpassed their old bugaboos: a slightly soft upper midrange and lower treble (those hits on triangles not only lacked punch, they lacked transient bite and, even more, shimmer). Can't tell about the shimmer now, but I'm taking the day off work. I'm snagged ENOUGH and that works for me. '
I'd recommend starting with a Viper, because I KNOW you'll hear it, and if you can hear it from the lower cords in the range, you can expect jumps from the higher ones. One Python and One Viper today: 2 more Pythons in a couple of weeks (there goes the summer vacation in Ibiza, but given the medical things happening, I'll just have to use my imagination when I'm listening to Chabrie that I'm in sunny Spain or on Ibiza. I think with these cords, I could fool myself [don't worry, I've have the fan on to simulate the breeze]).
Try these out guys. I'm using Ushers, and driven by ASL Hurricanes and the Cambridge Audio 840C with transparent interconnects/speaker cable. (yeah, yeah, stifle yourselves. I have Shunyata speaker cable and interconnects too, but this is what's in the system at the moment and I'm HIGHLY analytical. Never change a compoenent during a controlled experiment)
Oh, one more thing: the tonal quality of groups has improved in the new iteration of cords: brass are a LITTLE golden, strings silvery, and on Balalaika, I actually heard more of the body of the instrument, which is to say, instead of just strings, there's more texture, so it doesn't sound like it could just be a guitar. Quite a jump in the line's resolution, especially the low-level resolution...Maybe it's the midbass-to-lower midrange dynamics, which SEEM more powerful. OR maybe it's the fumes from that Rogaine I just put on my scalp ...
- ...
- 83 posts total
- 83 posts total