Will a good power cable replace the need for a PC?


I've heard mixed opinions on the use of a power conditioner. My question is, does the use of a high end power cable replace the need for a power conditioner? A local high-end retailer claims that the power cables he uses can run directly to a wall socket, and that a power conditioner can actually create more problems than it solves. I'm currently in the process of upgrading my cables and wondering what the best solution is.
prs2413
Interesting to know. I'm actually using a furman amp for my studio equipment. Works great. Thats actually how i first realized the potential of a power conditioner. Before I bought mine I was getting this irritating hum on every track when it should be silent. Its more noticeable when you can actually SEE the AC hum on your track. Bought the PC and it drastically lowered the noise floor. The furman I have is a rackmount unit, so ill have to take a look at their other options.
Anyone has good things to say about PurePower regenerators/conditioners?
Albert, have you tried it too?
As to power cords, they sound quite different to me but vary considerably with application and system; still a lot there not fully understood. Worth spending some money on or making up yourself but some of the prices are very high.
Inna,

No, I have not tried that one. The most expensive one was a regenerator which converted AC to DC and then generates a "perfect" output. It actually improved the CD but when we added the turntable and six box Aesthetix phono and preamp it smoked the regenerator.

I was happy the regenerator belonged to a dealer and the test was at his insistence. I cautioned him about hooking to my (then) Aesthetix due to power draw.

I think the question is, do you NEED a power conditioner?

My comment about the high rise hinted at that but if you don't have a problem the conditioner can make things worse than doing nothing. Again, people are going to report their findings and even if accurate do not mean it applies to us.

That means every ones experience will differ, depending on where they live, the quality of their power and even their equipment. So far I've been better off with lots of dedicated copper runs to high quality equipment with no conditioner.

Some manufacturers I've approached lost interest in my trying their conditioner after learning how "over the top" my electrical is.

I have 3 phase at my residence and it's all copper, triple double zero runs with a 750 amp service drop with a trans socket meter (for a commercial building).

This route fixed a lot of problems and cost less than patching up afterward with a bunch of plug in processors. The problem is finding a commercial contractor that will do this on a home and then getting approval from the utility company. It requires an additional transformer (expensive) and a lot of labor.
Albert, what you did is very impressive. Unfortunately, some of us who live in apartments, condos and rented houses cannot do it. You also mentioned the difficulties that this approach may encounter.
What I need first of all is to stabilize the power and only then think about conditioning. So I thought that something like better Furman or PurePower might work well in my modest system and do both things at the same time. For now I only have a turntable, small phono stage, tape deck and 60watt/ch integrated to plug in. And in my experience power cords can sometimes do wonderful things, by the way.