Power Cords--Your Preference?

Swapped around three main ones. Ended up with Shunyata Venom 1 on Earthquake sub, MAC HC on the other sub (AOS) in the HT. fo two channel, I found the P/C Cary suggests-xtreme power master works best on my Sophia Baby amp.

Back to the MAC HC on the amp. There's just something special about the sound. More open and spacious. HF is more natural. Who knows, might change again tomorrow.

Fusion Audio The Enchanter is an excellent power chord for digital players.

I currently use Prana Wire on my DAC and Power-Amp and JPS Labs on my CDT PSU, Pre-Amp and Turntable. I have to say ab-fab! 

Regards,

I'd recommend a DIY solution with 16 gauge solid-core installation copper wires. They're extremely cheap, but most importantly I find they sound great as power cords. I've experimented with 14 gauge solid-core wires as well, but preferred the thinner variant; the gauge 14 wire to my ears surpressed the top end slightly while also having a somewhat ripe bottom end, whereas the gauge 16 wire felt to be the most evenly distributed "sonic provider." Indeed it feels just right with gauge 16, but some may differ depending on personal taste and setup.

I'd recommend, per my own use of them in my setup, that the individually insulated lead- and return-wire be twisted with about 3 twists for every 4 inches, and then twist the groundwire in the opposite direction. I find twisting the wires makes for a more coherent sound.

Moreover I use no power distributor, though I'm aware this may be a rather impractical solution. Instead I connect each of the leadwires, each of the returnwires, and each of the groundwires in their respective screw terminal with the corresponding wires from the wall outlet. This way the practical, but sonically not-serving plugs are erased from the audio chain(at least in the other end of the audio components) - to much avail, if you ask me. In this case (also), less is more.

If anything it's cheap and straight forward to try out. I'd be interested to learn of what others find of this DIY solution, but with regard to the named solid-core wires and the lack of a power distributor :)