Has anybody tried using single solid core cables?


At a recent hi-fi show an exhibitor auditioning $47K speakers repeatedly asserted the following: "Any solid core wire, even $0.03 a foot is better than any multi-strand available. Experiment for yourselves, you will be amazed."

My question before I ditch my multi-stranded Audioquest Indigo cables in favor of 4 individual single solid core 18 gauge cobber cables from Home Depot for my newly acquired SA Mantra 50s, has anyone tried using single solid core wires?
arcamadeus
Great question!! I've tried the expensive firehoses, multi-threaded, and the stuff from Home Depot - yes, the solid core - I think it's the 14 gauge. The solid core from the hardware store wasn't bad, but I much preferred the solid core Anti Cables. I currently use MapleShade Helix solid core. Very small gauge compared to the Anti Cables, but both sound good. And the price is right too! More than the solid core from Home Depot, but for $150 or so, you get about a 12' pair.
Thanks, Kijanki. Good analogy.

A slight correction to my previous post. When I said:
Now a case could be made that damping factors above a few tens of ohms are overkill with most speakers ....
Damping factors are of course not measured in ohms. They are a ratio of two values that are each measured in ohms, so they have no units. Therefore delete the words "of ohms" from the quoted sentence.

A happy and healthy 2014 to all,
-- Al
Re the Indigo cable and the solid/stranded question, while a case could be made for referring to it as solid core, IMO (based on what I perceive to be the most common usages of the terms) cables employing any form of Litz construction (i.e., a single overall conductor consisting of a group of individually insulated conductors) should not be referred to as either solid core or stranded. It's simply a different animal than what both terms are generally used to refer to.
12-31-13: Almarg
Al,

I have to disagree with you on this one. I see a difference between a conductor made up of several bare wires that are in direct contact with one another covered by a single insulation covering to that of several insulated solid core wires grouped together under a common jacket.


Here is an example of a stranded wire conductor made up of several solid core bare wires covered by an insulation covering making up a single conductor. (Example, look at the 500 awg conductor. It is made up of 37 #12 awg bare solid core wires.)

Here is a 4 pair CAT6 data cable made up of 8 insulated #23 awg solid core wires.
If we were to connect all the bared copper ends together at each end we would now have a single conductor made up of 8 individually insulated #23 awg solid core wires.

If you go to the Audioquest and look at the DRAGON speaker cable you will see it is made up of 14 insulated solid core FPS silver conductors.

2) #21 awg Polyethylene insulated wires.
2) #21 awg Carbon Loaded Polyethylene insulated wires.

2) #19 awg Polyethylene insulated wires.
2) #19 awg Carbon Loaded Polyethylene insulated wires.

3) #17 awg Polyethylene insulated wires.
3) #17 awg Carbon Loaded Polyethylene insulated wires.

I see the raw cable as a 14 conductor multi wire cable.

Jim
I see a difference between a conductor made up of several bare wires that are in direct contact with one another covered by a single insulation covering to that of several insulated solid core wires grouped together under a common jacket.
Hi Jim,

I do too, but I don't see that that conflicts with what I said. What I said, in essence, is that it would be misleading to refer to the AQ Indigo cable as either solid core or stranded, as those terms are generally used. It is neither.

All the best for 2014.

-- Al
Innocent question: are the Anti Cables directional, I.e., do they come with arrows indicating direction of signal?