Breaking of Furutech's AC connectors...??

I'm not saying anyone else is wrong or that I am right.
I am only communicating my own experience.

I have been building my own PCs and settled on the Furutech FI-11, both R and G, after experimentation. My cabling is either bulk Neotech (NEP-3200, NEP-3001, NEP-3002) or Furutech (FP-Alpha-3).

I haven't re-terminated any manufacturer's pre-built power cables so no experience with that.

Rja.Thanks for clarifying..It's ok.No problem.Just for curiosity.Which are the differences in sound performances between the neotech cables series and the furutech cable using the same FI-11 G connectors?Many thanks for your comments.Raf

dear fellows, Regarding cables (power, Ic, Speaker) and audio system matching, there is no any objective rules. The sound/quality improvement terms are subjective matters. It is not an exact science and It is all system dependent! Everybody express its own experience and Everything is based on Test-Try.

For FI-11N(G), even after 30-40 hours of break-in time, sound was not bad at all. However, much more improvements began to manifest gradually. In my system, after ~200 hours I heard more details and more dynamic with layered soundstage. at that time, my hesitation between Gold and Rhodium connector was removed! I use Rhodium connectors from Wall to Power conditioners with a great result and then after it is all Gold connectors. I tried Gold-Gold connector, Rhodium-Rhodium, G-R scenario too but I was not pleased with the results. my taste on sound quality parameters could be different compared to others!

As Raf mentioned, results could be different in some other systems depending to source component, pre-amp, amp and their connecting cables.

I look forward to read Raf's experience regarding changed sound parameters from original PAD power cord connectors (I guess it was Wattagte Brass) to Fi-11G. please let us know your impressions...
cheers,
Michel

Rja - What ends did you use with the Alpha 3?

I tried Neotech gold/upocc ends and thought the sound was too warm and mid-rangy for my tastes. I ran them in with a fan for a week or so, then used them for a while. Pretty sure they were run in enough.

I purchased a Neotech rhodium/upocc IEC and will try that along with the gold plug.

Aplogoies to the OP if this is off the mark as to what he was interested in.

Rja, my cables were pre-manufactured with Fi-11R and changed them to Gold.
looking at your cables, there is an interesting article here after, pointing out usage of Furutech (FP-Alpha-3) with Furutech Gold and Rhodium. hope that would be informative.
There are other links on his website (cable reviews) which is very useful and honest.

http://www.hifi-advice.com
Furutech-alpha3-review.html

Michel.