2. tech-talk
  3. 1314138026

The next best Tweak ???

There have been several postings at AA about a new tweak from the mind of a gent named unclestu that I would like to share with Audiogon members.

I really don’t know why it works or how it works.
This tweak will cost you about $10 bucks but hold on to your hats...

unclestu discovered that the Ground Control (that was designed by Bud Purvine and sold by AudioPrism)design could be improved on.

You will need to make two sets for your speakers.

What unclestu came up with is to take a 6V Lantern Battery, add a 1000uf Electrolytic capacitor across the top springs (+ to + and - to -) connect a wire to the negative side of the battery and then attach the other wire end to the negative post on your speaker.

I have also made a couple that I plug in to my Preamp and Amp. Those were made with RCA’s ground on the wire end and I used 9V batteries utilizing 9V battery clips.

I've got to say, big improvement across the board, Soundstage, bass, mids, treble. But the most dramatic change is in the dynamics.
128x128ozzy
pixelphoto
70 posts
 
Anyone have a idea as to how long it takes for a 10k cap to charge when connected to a 6v lantern battery?
ozzy's avatar
ozzy OP
7,460 posts
 
Pixelphoto, Mine seemed to sound pretty good right away.
However it seems to get beeter in the bass after a few hours.
pixelphoto
70 posts
 
Ozzy, the same here (hear). I recently bought a NAD C 326BEE intergrated amp.; burned it in for 4 days nonstop. Played some Diana Krall and noticed that most of the sibilance I always heard was almost gone. I attached a 6v battery with 10k cap to the amp and that eliminated the remaining sibilance. All gone, banished. There is much more to be said about this tweak but I'll end with, I'm really happy I found out about this tweak.
ozzy's avatar
ozzy OP
7,460 posts
 
Has anyone run dual Lantern batteries at the speaker end for bi wire cables? Input would be helpful, but I'm going to try it later this week anyway.
I just converted my home made Speaker cabkes to bi-wire. They now consist of one run of 14 ga and a run of 18 ga 5N Soft Solid Silver wire.
ozzy's avatar
ozzy OP
7,460 posts
 
Well I now have a bi-wire speaker cables and I have just connected up 2 sets of 6V Lantern Batteries with 10K Caps at the speaker ends.
Wow! What a satisfied sound. The best I can describe it is, the music sounds relaxed and natural.

Now, I know I have raved about this tweak for some time. And there appears to be 2160 views on this topic thread. I hope I have encouraged some of you Audiogon tweakers to give it a try.
More to discover