WA-Quantum GmbH's Quantum Chips

Sorry, I meant it's as if i added another QOL.

Love what the QOL it does but the hiss does annoy me. The hiss has become clearer now that the chips are installed.

Ok, makes sense.
So, you are using some of the chips with the Qol? I had the Transformer and Cap chips on it for a while but I have recently removed them but I don't recall hearimg any hiss.

Very happy with the Power Chip on the inside of my circuit breaker box panel. I have fuse, cable, and transformer chips, and the Power Chip
has proven to be the best, IMO. I had experimented with moving the chips around, and trying them in different applications (cable chip on a transformer, for example), and was not happy with the results.
Maybe I will try a Power Chip outside the house, like where the
utility lines come in?

From dealer for the WA Quantum Chip:

"Chips that have been cut or otherwise opened up to expose the interior treated material are explicitly excluded from this Guarantee."

It would appear that cutting or otherwise exposing the interior quantum material exposes the material to light, which would change the nature of the quantum material over time, just as the number if treatments of the original Intelligent Chip was limited due to repeated bombardment by the CD laser. The WA Chip sandwich material is almost certainly some sort of polycarbonate film or similar IR blocker that protects the quantum material inside the sandwich from exposure to sunlight, room lighting and laser light.

Cutting the WA Chip allows light to enter through the edge of the chip, changing it's functional characteristic. It's also possible the sandwich material is not 100% lightproof so that a sufficient amount of light permeates the film over a period of time - especially in proximity to a CD laser - to change the functional characteristics of the quantum material.

Agreed that power chip is the very effective but characteristic may make it sound more closed in i.e result of more focus. this may result in other chips tto come to play to open and smoothen the sound.

it soynd clearly more ballsy and full sounding than the other types of chips. thats way im going to have spare chips to fine tune may be the way to go. again system dependent. imo power chip may sound hard and harsh in a system that sound on the raw side already.