2. tech-talk
  3. 1391797265

Copper®Harmony RCA Plug - a new breed

I was contacted by KLE Innovations recently to review their entry level RCA connector (plug).

I have no idea why - Maybe due to a blog that I maintain?

Anyhow - I was a little skeptical that the Copper Harmony RCA Plug could significantly better my existing Silver Bullet RCA's, since they share (i.e. visually) very similar design principals.

So I set about planning a testing strategy based on about 30 tracks that, over the years, I have used for auditioning various audio components, who's purchase I was considering.

Well, I didn't even have to wait for the Copper Harmony RCA Plug to burn-in to realize they are something extremely special.

Anyhow - to cut to the chase - the Copper Harmony RCA Plug delivers an exceptional performance which improved upon details, dynamics, imaging, etc... of the Silver Bullet RCA's that I own.

Now, I have not compared the Copper Harmony RCA Plug directly to RCA's that conform to a more "conventional" RCA design, mainly because my Silver Bullet RCA's had already demonstrated their superiority.

So - the Copper®Harmony RCA Plug resolves to a very high level of performance and it is very very quick - perfect for just about any duty in the realm of audio - including their use on digital cables!

Because of their ability to allow the flow of extremely small "micro details" in an audio signal, I believe they would also be ideally suited for use on those turntables that employ a one piece wiring harness - especially when using moving coil cart's.

So if you are interested in the complete review please go to http://www.image99.net/blog/

If you would like more information from KLE Innovations then use the following

o Website – www.KLEinnovations.com (nearly ready)

o Email - KLEinnovations@clubtelco.com

Please note - I have no affiliation with KLE Innovations and was not paid to participate in the review.

I am just very impressed with what I consider to be a stellar product and feel it would be beneficial to share my experience with the members.

Regards...
williewonka
yping
351 posts
 
Sbrownnw, the Copper Harmony RCA's present a much larger 3D image with excellent resolution...

Hmm, the Copper Harmony RCA's are reproducing a higher resolution, so perhaps the questionable sources are reproducing some this resolution as noise rather than resolved harmonics, maybe? That is the noise isn't smoothed like honey or fudge...

What do you think Williewonka? Am I thinking ok...
yping
351 posts
 
Actually, I am really not sure...

Williewonka, do you think you know what is happening...
williewonka OP
3,082 posts
 
Could just be due to the RCA/cable combo conveying more audible information than that conveyed by the cable previously used, so if the source contains more "noise" perhaps that noise is now being heard?

Some components respond negatively to some cables.

Sometimes the power cable and Interconnect combination can have an effect on a component.

Sometimes the outlet the component is plugged into can cause an issue and the introduction of a better quality Interconnect merely highlights that issue.

Hard to pinpoint without experiencing the setup and the issue first hand and trying some different alternatives.

Sorry I couldn't be of more assistance
sbrownnw
710 posts
 
I think the AV comcast box or the channel's source is poor / slightly out of phase or focus and the KLEI Copper Harmony RCAs just exaggerate that...
williewonka OP
3,082 posts
 
OK - if the L/R are "out of focus" - then yes, the RCA's will provide cleaner transmission of fine details, so the new RCA's will exacerbate that condition. You'll hear more of it.

If the AV Comcast Box has an IEC plug you could try a better power cable.

Some boxes have the C7 IEC plug like my DVD player - I bought an adapter that converts C7 to C14 (3 pin)and upgraded the cable using more standard C14 IEC connectors

I always start with the power supply and proceed from there.

If it's "plumbed in" there's not a lot you can do without "surgery"

Switching to a less detailed IC as you had indicated might be the cheapest solution - if you can live with that.

Also - If the Mogami's are anywhere near a power cable or source of interference - like digital components - get some space between them.

Regards...
More to discover