HELP - I need a cheap pro logic amp & I'm lost -

What is your budget? I have done quite a bit of searching lately for an inexpensive solution to that, and no where some of the bargains are.

I'm useing a Luxman F-114 processor, it has 50 watts per channel (3 channel) and is pro-logic. I run it through one of the tape loops in my pre-amp. It works out pretty good as the wife and kid are happy when we watch a movie, and I switch it out when I listen to the stereo, so it has no effect on my main amp . Almost like haveing two systems. Sounds pretty good too! TG

The Adcom GSP-560 will do what you are looking for. I know that Yamaha and several other companies made processors with amplification for the center and surrounds built in. The Adcom can typically be had for about $150 give or take.

Quite honestly, the difference between Dolby Pro Logic and Dolby Digital AC-3 is pretty staggering. I would REALLY recommend checking into at least that aspect. Obviously, it would cost measurably more money, which might not be in your plans right away. The next step up to DTS is also worthwhile if the rest of your system is up to it. Sean
>

I would not recommend a Pro-Logic unit. Dolby Digital is the only way to go. You probably want DTS also. If you are on a tight budget, you can skip 6.1, 7.1, Pro-Logic2, etc for now. Please tell us more about your current system and budget if you would like specific recommendations.

Thanks for the input, guys. I know this home theatre concept can be an expensive proposition, and in the grand scheme of things TV and DVDs take a back seat to 2 channel stereo with me. It's fair to say that I know about stereo but I must confess to little familiarity with 5, 6 and 7(!) channel. I'd like to have a bit of the "Theatre Experience" when I watch a movie and some of the live concerts I pick up on sattelight broadcast. I just haven't spent that much time researching the subject; which is why I have deferred to your input. I would prefer to accept the evaluations of those more experienced than I in these matters rather than reinventing the wheel. But in answer to your question regarding my budget...

As this will be my first shot at 5+ channel, I'd like to buy a used prologic processer/amp systemprocessor amp and stay at or under $150. But if digital is really worth it, I guess I'd look at $500 for a used system or so if it would really make a difference.

Your opinions please...