2. digital
  3. 1401420371

What happen??

Had a power surge that shut down 1300 homes, so I unplugged the amp, CD and Noise Harvesters. When power came up I plugged all back in but... the ARC CD 3 Mk 2 didn't come to life not even after using the front panel buttons, changing the PC and retrying for 5-7 mins. After 45 mins. my wife tried plugging something in to check that socket and it worked so, she tried the front panel buttons on the CD with no results, she continued by pressing 1 button at a time and then the Stand By. the 2nd button she pushed the display flashed. So she hit the Stand By and the CD came to life! She called me and I tried making sure by powering down and hit the Stand By and my beloved ARC was alive!! Tried a CD and all seems well now, But, can anyone help me as to what may have happen??? The Unit has ALWAYS comes to life when plugged in, NOT almost an hour later, can someone help?

And now should I have to get a surge protector of some sort? AND IF SO what would be best recommended on a very tight budget?
rsjm80
djohnson54
396 posts
 
Rsjm80, you don't mention what your budget is but several years ago I bought a Furman Elite-15 PFi. I was one of those people who thought they had pretty good power and I bought it mainly to tame the mass of cables behind my rack running to two separate outlets. I was stunned by the positive change it made in my system. It has the added benefit of surge protection too. I still unplug during severe weather but now I just have one plug to pull. :)

Elizabeth is also a fan of Furman but I believe she uses their reference series. Audio Advisor sells the 15 PFi for $699 although they occasionally have an open box or demo for slightly less.
Dick
kijanki's avatar
kijanki
4,427 posts
 
Djohnson54, I had similar experience with Furman Elite 20PFi. Over/under voltage protection is non-sacrificial.
audiolabyrinth's avatar
audiolabyrinth
4,555 posts
 
My question is, what about a surge protector recepticle from vh audio or the parts connection?, would this work with out any restraining of the current for low power consumtion such as pre-amps, digital products, anything but power amps?
rsjm80 OP
207 posts
 
Djohnson54 Right now my budget is very tight as I'm recovering from surgery and just don't have the need for anything that has multipul outlets as I'd then have to cut my PCs and have them shortened to contend with cord lengths and I'd much prefer not to have to invest in a nice stand alone that would require what I've already mentioned plus still have to contend with another PC so that leaves me in a quandary. For now if I could find a solution that would be inexpensive but, not sonically harmful that would be my best solution in the short term. Thanks for the recommendation of the Furman, I'll also check out their offerings and see if something might fit me and I'll post later.
djohnson54
396 posts
 
Rsjm80, I understand about the budget. I'm not clear on your reference to multiple outlets. Unless you plan on using a surge protecting outlet(s) as Audiolabyrinth refers to, it would seem that a device with multiple outlets would be necessary. In any case I know that Furman also makes power strips http://www.audioadvisor.com/Power-Line-Strips/products/294/ that are less expensive but I have no experience with those.
More to discover