2. home-theater
  3. 1118626912

HELP Need to reconnect and lost instructions.

I am changing equipment to entertainment center and left all connects in the receiver , unpluging from the sources.Then I forgot frim where the following were unplugged .

Problems : 1) connecting back to VCR. There is one set from receiver(audio left and right/video labeled IN and one set OUT. Does the IN from the receiver connect to the OUT on the VCR and the OUT from the receiver to the IN on the VCR ? 2) The coaxil from the TV - does it go to the VCR VIDEO OUT or VIDEO IN ?
3) The subwoofer connection to the receiver goes where if there is no Subwoofer ID on the receiver ?

Thanks for any help you can give.
obrown
chadnliz
3,736 posts
 
For your VCR, the OUT of the VCR goes to the IN on reciever.
Then the Video OUT on Reciever goes to TV IN.

From the Coax, go from wall IN to the VCR, Then go OUT from VCR to your TV.
If your reciever has no "SUB PRE-OUT" then it will most likely hook up to the Left and Right speakers along with your front speakers.
If it does have a sub pre-out hook it up to that (this would mean your subwoofer is self powered...do you plug your subwoofer into the wall?
hope this helps
obrown OP
80 posts
 
Thanks , yes the sub is powered. The connection may be identified as "low pass" on the receiver .
chadnliz
3,736 posts
 
yup...you should be all set...happy listening
obrown OP
80 posts
 
It is working fine. Thanks for your help. One more question, please.

My 65 Klipsh sub was fine for my small basement room but not for my new open family room. Should I put a splitter on the low-pass receiver outlet and add a 2nd sub (if so, how do I adjust the settings and what size for the 2nd) or scrap the very good(tight) 65 watter and use a large single ? Any suggestions on brand.
More to discover