VPI Aries - either or question, please comment

The Aries 2 and the Black Knight share the same chassis, motor and main bearing, the difference is in the platter. the BK uses a standard 11.56" diameter platter of black acrylic, 1.75" thick. The Aries 2 uses a 12.25" diameter platter of clear acrylic 1.75" thick and can use the HR-X periphery ring clamp. If you buy a BK you can switch to the larger clear platter at a later date, the bearings are the same.

The BK has special pricing and incorporates the JMW-9 arm as a package. It is considered the logical step up from the Scout and we refer to it as a Scout with a testosterone shot. If you enjoy the sound of the Scout the BK sounds the same but is smoother, more powerful, and is quieter.

BTW, I had a really enjoyable Sunday with the NJAS folk, a great bunch of audiophiles/music lovers. Now that I know the system I would love to come back at a later date with a cartridge that was more compatible than the Tae Katora, possibly something like the XX-2 or the Black Beauty, or the new Audio Techne. Thanks again for your kindness.

Jonmatd,

Thanks for clearing up some of the confusion over the different Aries versions and the different platters and bearings.

As you can probably tell from my posts, I really enjoyed Sunday's meeting too. Possibly the Tae Katora was a little plump or romantic sounding for Vinh's Vandersteens, but it wasn't too far off the mark for my taste.

Certainly I'd be up for another meeting and would love to hear those 15 ips master tapes you spoke of - especially if you have any of the vinyl versions to compare them to.

I hope your allergies have calmed down a bit. Have a nice holiday in spite of the weather. I believe I'll be in Somerville on Memorial Day, watching the bike races in the rain. :)

Hi,

Question about the Black Knight. I hope you won't be offended by my question, but when I heard the Scout recently, it seemed to have more drive/pace/rhythm than VPIs I've heard in the past. (I admit I'm basically an Anglo-phile when it comes to stereo, although I also appreciate the greater dynamics/LF response/fullness decks like the VPI can do.) Is the Black Knight similar to the Scout in regard to pace/rhythm etc., IYO? thanks,

Terry

now i hear that the black acrylic platter on the black knight is NOT the same as the platter on the Aries-2. In other words, it seems that if you don't like the look of the 'clear' acrylic platter on the aries-2 you have no choice but to downgrade to the black knight platter or upgrade to the TNT platter.

i've decided to hell with it...whatever platter shows up on the tt when i open the box i'm keeping.

now if i can only get a straight answer from someone about the validity of NOT using a shelter cart on a unipivot arm i'll be on my way to hearing music again.

You can try to use a Shelter on it, and I understand that Harry has supposedly done something to the arm that he claims will make it handle a Shelter.

If it were me, I'd use a different cartridge on that arm.

The technical reasons are that unipivots, with some exceptions, notably Graham, WB, and Nottingham which have stabilizers, are inherently unstable platforms due to the nature of the single pivot design. When using higher compliance cartridges, this is not much of a problem, if any. When using lower compliance cartridges, such as Shelter or Koetsu, there is significantly higher energy fed back into the arm by the stiff cartridge suspension. This causes the arm to move about in ways that is not good for retrieving the sound. Of course, the cartridge will work in this system, but it loses much more than a similar quality gimbal arm would. Some people don't care about this, and do it anyway, and seem to be satisfied with it. If that is the case then I'm happy for them. I am just pointing out the fine details of proper cartridge matching that goes beyond mass/resonance. Maybe Harry has come up with something that will work with the Shelter. If you want to use a Shelter in a JMW arm, then I'd recommend that you call VPI and ask them directly if the JMW-9 you are getting is an ideal match for a Shelter 501 or 901, or not. If they say it is, then it is on their heads if it doesn't work right. I'm just trying to look out for your best interest by pointing out a possible problem before it becomes a problem for you. I know that they commonly recommend, and even sometimes package Dynavector cartridges in their tonearms. It seems they think that a Dynavector is an ideal match for their arms. A Shelter and a Dynavector are worlds apart in terms of compliance. If VPI says it's ok, then go ahead. If not, stay away.