Has anybody tried a Shelter 501/Linn Ekos comb.

Restock, thank you for your rapid answer. According to the Linn dealer the body of the Denon is larger than other cartridges. It seems that he cannot affix the cartdridge to the headshell for that reason. My guess is that the Shelter has an average body (3/4?) and it will fit the headshell of the Ekos, but I wanted to know for sure before selling my Denon and buying a Shelter. Thank you again, Pablo.

Pablo, as per our recent email conversation, I also cannot figure out why the 103R won't fit in your arm, because I used it in my OL arm, and I also use a Shelter 501. I'd like to know which "dimension" of the 103 is "too big" to fit in the Ekos. It fits in virtually every other headshell that I know of, and has standard screw spacing. I have never heard of any 103 being "too big" for any headshell.

However, if you are "forced" to use a Shelter 501, this is not a bad thing, because is is better than the 103R anyway.

I think I may know the answer. I had a lp12 and tried a 103d years ago. Like 15-20 years ago. The Denon cartridge does have a large body, it's not the mounting into the screw holes, it's that the cartrige hook up pins extend back into the tonearm hookup pins. It's a bear to get the cartdige leads connected...it's almost like the cartridge pins and the tonearm pins are alomost touching...no room for the little wires.

Again, this isn't a conclusive answer...but a theory.

Jfrech, thank you very much for your answer. At least now I have a theory! Being a social scientist I feel much better than yesterday ... Seriously, thanks a lot: what you are describing is exactly what the Linn dealer described to me few days ago. Pablo.

Pablo, looking back at my DL103 that is sitting in my RB600 Rega arm, the
Denon is slightly longer than the Kontrapunkt A I have. However it is sitting
much more to the front of the headshell so that effectively it does not extend
further into the back than the Kontrapunkt. It might be possible that in order
to achieve the correct geometry (using a DB protractor) the cartridge has to
sit more forward in the headshell, so that there is no problem with the
hookup pins hitting the tonearm pins on the Ekos as well. Did your dealer
check the alignment correctly?
TWL is probably right in that the Shelter is a better cartridge anyway (still
hoping to hear it someday). Can't argue with him. However the size/length of
the cartridge won't tell you very much wether it will extend to far to the back,
since that will depend also on the cartridge alignment to achieve the correct
geometry. It might be worth trying to shift the arm slightly forward so that
the cartridge can be mounted as far up front as possible.

Also I do remember seeing people use the DL103 with an Akito or Ittok arm,
can't remember the websites though.

Again, Good Luck!