Good turntable equipped for about 700 dollars?

Twl: Linn probably stole / modeled their motto after Stiff Records, which was a "punk" record label back in the 70's and early 80's. While they had MANY "amusing" motto's over the years, the one that i was thinking of went something like "If it ain't stiff, it ain't worth a ****". Beautiful, ain't it ??? : ) Sean
>

Hi,

Here is some further info with regards to buying a used Linn. There are only 4 screws on the base to remove if one wanted to inspect things. Should you consider an LP12 from a distant seller, I would want a photo of the innards, so to speak. The primary concern is the Valhalla. Look closely at the Vahalla for evidence of heat. This is easy to identify since the mounting board will be discolored. I have a bad board and will be glad to forward a photo of what NOT to buy. By the way, the table would still perform but didn't sound right, having lost it's famous PRAT.

I always urge folks to do it right the first times since it's much cheaper in the long run. Bump up your investment a couple of hundred bucks and you can get an Ittok in the mix. This is a great arm and is well worth the extra $$.

As a Linn owner I can attest to the pleasure of owning one for well over 20 years. Yes, there are better tables BUT you would never have a COMPELLING reason to replace it. It is that good.

Are there any additional considerations when buying a "transcription" table instead of a "normal" LP12?

From what I've heard, all LP12's are called "Transcription" turntables. However, they only accept normal"length arms. Most "transcription" arms that I am aware of, are long arms, around 12 inches long. These will not go on an LP12. There are different meanings to the term "Transcription", that are applied to those using the term. All record players could be called "Transcription" TT's because the all "transcribe" the sound from the record. Some apply the term to mean a kind of "reference quality". Others use the term to indicate a large platter and/or long tonearm length. I know this doens't really clear things up all that much for you, but those are the references that I've heard for the term.

Can anyone offer advise regarding the difference between a Linn LP12 and an Aerostan LP12? Thanks, Peter