2. analog
  3. 1040952428

Calling all "Vinyl Heads"

As 2003 approaches, I realize that it's time that I upgraded my turntable. Presently I have a 10 year old Roksan Xerxes with an RB300 arm and a relatively inexpensive Shure MM cartridge (I am the original owner) and I am wondering which upgrade path to take.
I would be interested in hearing from anyone who has purchased or serioiusly researched a turntable in the $2000 - 3000 range fairly recently to hear about the relative merits of the equipment available in or near the price range.

I realize that I do have a few options in terms of keeping my own turntable and upgrading the arm and/or cartridge, and would also like to hear opinions on that topic. So far, the tables that have piqued my interest are Teres, Nottingham, Clearaudio, new Roksan, and Audiomeca. Of additional interest is any info regarding cabling issues with various tonearms - captive cable, din plugs, junction boxes, etc.

In terms of musical interest and sound preference, I like a neutral and realistic reproduction, and listen to a wide variety of music - literally anything except opera and thrash metal. The rest of my system consists of:

Blue Circle BC23 phono stage
Blue Circle BC3000 preamp
Blue Circle AG8000 poweramp
Martin Logan CLS IIz speakers

Thanks in advance for any input!
esoxhntr
jeffloistarca
1,004 posts
 
Analog folks are religious, everyone's rig is spot-on. For my money (and I've spent my fair share) I can't imagine anything better than an Oracle Delphi IV or V. Fantastic performance and visually stunning! A SME IV or V arm and cartridge of your choice (high end Grado, Benz, Koetsu) and you're in analog nirvana. YMMV and of course you'll get VERY different inputs from the various vinyl afficiandos here on the 'Gon.
drguayo
30 posts
 
I would keep your TT, put money into your arm and upgrade the speed controller/dsu or replace the motor altogether. The roksan table/platter and bearing are fairly high end. Between this arm/motor upgrade and a new catridge you will have incredible gains in sound quality. I would get a new arm and cartidge first and have a listen. You'll have to purchase these anyways if you go the new table route. Of the tables you mentioned....listen to TWL and get the Teres. I personally compared Clearaudio Level 1 Champion to my Audio Note TT1($700) and bought the Audio Note due to its superior sound.
sean
6,231 posts
 
Personally, i would probably keep your table and upgrade the arm and cartridge. If i had to choose one over the other, i would not hesitate to dump the Shure and go for another cartridge. If you wanted to stick with a simple to use MM cartridge, i'd recommend a Stanton 881S with proper loading ( NOT factory recommendations ). Your arm might be a bit heavy for this cartridge though. Otherwise, the Denon DL-103 sounds "creamier" so long as you have enough gain. Either of these cartridges will show you what you've been missing without hurting the budget in the least. Sean
>
sugarbrie
3,854 posts
 
I see you duplicated one of Gilbert's reference systems.
theo's avatar
theo
2,690 posts
 
Ok, here is the curve to all this. Buy a Linn Sondek LP12
start out with a base table to get into it and over the next few years go for the upgrades. Keep your RB300 to start then upgrade it later. I recommend the Incognito harness for the RB300 it is a very good upgrade available from Lauerman Audio (the importer of Rega) for approx 250.00. But a turntable is an evolution in ownership. And the Linn is a great table with many upgrades available.
The beauty is, you can forever tweek and and enhance the sound as your listening fatigues over the years. You can actually start out with a used one and completely re-build it through the years. A very good source of information is a dealer in Ft Collins Colo at audioalternative.com, he has and does rebuild these tables by the numbers.
More to discover