RRL Cleaner, Vinyl Zyme, and Groove Glide

Styx: A simple solution is to install some type of adjustable pressure relief valve into the vacuum system. This will allow you to achieve the highest levels of suction without actually lifting the disc off of the platter. If you don't want to get fancy, you can simply drill a hole in the vacuum hose or a plastic fitting and cover part of it with your finger. By varying how much air is sucked through the "controlled leak", you'll vary the amount of air ( suction ) at the disc. This allows you to adjust for the weight of the disc, as some discs are noticeably heavier and can sustain higher levels of suction whereas others are very light and flimsy and want to get pulled up very easily. If you have enough hose / fittings to experiment with, you might be able to find just the right sized "bleeder hole" i.e. a happy medium for all discs without the need for manual manipulation to regulate the suction. Sean
>

Styx,

Just drill two 3/16" holes on either side of crevice tool. These will allow for vacuum release and you can easily cover them with your thumb and finger if/when you need to boost the vacuum. As to sucking up the velvet, did you glue velvet strips on either side of the slit on the crevice tool? These methods have worked very well for my on my DIY RCM. My only complaint is that the thing is so damn loud.

Dan

I used self-stick felt or velvet (forget which). Vacuum felts need to be changed regularly as they get contaminated and this made it easier.

I vacuumed with my GroovMaster on the record. That protected the label and gave me something to hold it down and spin with. Full Shop Vac power, no problem. It was slow though. I'm sure most of the DIY machine-based ideas others have published would be quicker, though I doubt they'd suck any harder!

Has anyone tried L'ART DU SON record cleaning fluid that is available from themusic.com? I've been using RRL but saw this stuff and was curious.

Styx: The answer is to experiment, and let your ears decide. And, it may very well vary from record to record.
Strongly suggest a RCM, even the lowliest.
Just read Mikey F's Compleat Guide to R-C'ing, and yikes...talk about A-C disorder. At what I'd estimate at 20 minutes per side, 1 record per day, several man-years invested here...

Strongly suggest a RCM, even the lowliest. At the least, using DD per instructions, you'll be ahead.

Congrats on trying vinyl again...
And please ignore the Famus Audio Revuer, who's wound up so tight that he says it's required to adjust VTA before playing each record.