Twisted or Straight?

Thanks Will, I completly forgot about the Virgins :^)

Just as long as your having fun and not burning down the house it really doesn't matter what you do IMO.

I ran six dedicated circuits to start and am now kicking myself I didn't run ten. There's just something about isolating every component, sub woofer and powered woofer section that really turns me on, and this time I'm being serious

The noise floor dropped dramatically with three circuits to two seperate systems. I can't help but wonder how much lower it can go.

This thread just keeps on getting better & better. Wow; 6 to 10 times the work that I had to do for my single dedicated line; is it really 6 to 10 times quieter? Could certainly be, but I really don't think I want to get that involved in this scenario. Have at it; whatever floats your boat is fine with me too.
Oz: I didn't mention above (I'm just not THAT into it) that some have found wire directionality to be a sonic issue, just as in audio cabling. That why I suggest aligning the printing on the insulation with all wires running the same way. I didn't try this myself, but some have temp'd in the wiring, listened for a day, then turned the whole thing around in the opposite direction & listened again. Hard to believe I know, but the results were that one direction sounded better than the other direction. By the time I had read about this, my own ded. line was already weeks old so I figured it was pretty much broken in & would only sound worse if turned around so I didn't bother with that test. Of course YMMV.

Bob,

It's really not that much more labor to run three circuits as opposed to one. I ran the circuits in 3/4" pipe (One to each location). Then pulled the wire, made up the devices, terminated the breakers, test the system and BINGO WE HAVE A WINNER! I actually have room in the conduits to pull more circuits but that sounds to much LIKE WORK!!!

This is really the way to do it. It keeps the grounds pretty much at the same potential and the lengths of each conductor about the same. Ground-loops is the biggest concern when running multiple circuits.

Audioengr,
I've surfed through your website recently.
You've got a huge amount of talk about skin effect.
Can you remind the formula calculating the current density? I want to apply it for audiable freeqencies and see the range of impedance changes.

Thanks!