Eliminating static electricity from albums??

Like Vvrinc and unlike Ncarv I find playing records often produces static buildup. My spindle and arm are both grounded but apparently there's still no good path from the vinyl to ground.

The old 'Dust Bug' type devices (sort of an extra tonearm with a brush instead of a cartridge) could be modded by adding conductive CF bristles and a ground wire. That would presumably do the trick.

Cleaning on my Loricraft invariably removes all static. I use a Zerostat after playing each side to remove any buildup. I'll have to try shakin' and nosin', good tips!

I clean them on a VPI 16.5 and treat them with Gruv Glide and that does the trick for me.

I got it direct from the Disc Doctor himself, and it seems to work for me (playing them). But, I live in South Florida, a very humid climate, so not a lot of static to begin with. I don't find the Zerostat, or my carbon fiber brush, does much for me in the way of static.

Rockvirgo - I think you have proved my method non-scientific! That is because before I shake (or "wobble" the record, I touch it to my nose. Then I wobble it, then test it by touching it to my nose again. The second time there is no static. Go figure!

Peter s, ok you caught me. The correct QUICK method is to touch first one edge AND THEN the opposite edge of the LP to one's nose. In stubborn cases keep nosing at various points along the edge until no detectable charge remains.

I of course applaud the wobble method so long as it includes the obligatory nosing.