2. analog
  3. 1098120960

Analog Upgrade Suggestions Welcome

I am thinking of making several upgrades to my current analog rig.

Current system: click here

First, I am thinking of upgrading my VPI HW19 MKIII to the MKIV. I would like those with first hand experience to tell me if the upgrade is worth the money, and what I can expect to hear in improvement. I am currently using the SDS and SAMA modifications.

Second, I am thinking of upgrading my cartridge. My Sumiko Talisman Alchemist IIb is almost 15 years old and is ready for retirement. Some A'goNers have recommended the Shelter 501. I didn't want to spend more than $1000 for a cartidge as the majority of my listening is still redbook CD. I am open to other suggestions. I want the best cartridge for the money. Also, I am leary of buying such a fragile item used. I have heard others on A'goN say they'd never buy a used cartridge. Please share any experiences out there; good or bad.

My current cartridge has an output of 2.0mV which I assume means high output. Will I need a step-up transformer for a low output cartridge? Is the Shelter 501 at 0.4 mV considered low output? My Classe Six preamp has a phono section. The preamp comes with resistors that the user can change out to match the volume control knob position to the level of line components. I assume I'd need to change the resistor I'm using with my current cartridge. Otherwise I'd have to turn the knob way up to get enough gain with a cartridge with an output that's 1/5 that of my current cartridge. Is that correct?

Thank you all for your help and suggestions.

Cheers!

Mark
mstram
Ag insider logo xs@2x
rauliruegas
13,106 posts
 
Dear Doug: The B&W specs are at Lab stage. The frecuency response of your loudspeakers in your room or another one it is always worst really worst. That's why I told you that your info about are only " illusions ": +,- 4db at 33Hz? in room?, do really know what are you talking about ?, I think you are an " inexpert " in this area, too.
I repeat again: some one told you that your speakers don't go lowest than 50Hz in a room. In that ocasion I remember your statement that you can hear 20Hz in your 803 speakers, this one was an inaccuracy, too?
Please try to learn about. Where do you left " the book ".
Regards and always enjoy the music.
Raul.
rushton's avatar
rushton
2,445 posts
 
Raul,

Your continuing personal attacks on Doug are tiresome, and the longer they continue, the more offensive it all becomes. I wish you would move past this one-upmanship game you're playing; all this looks like is your pique over not being crowned the Audiogon analog guru. In the process of playing this interminable game, it seems to me that you are alienating everyone who regularly posts here. You could become a valued contributor, instead you are making yourself a person many wish to avoid. Surely this can't be your intended outcome? (rhetorical question)

And I'm trying to "enjoy the music", but your trite little closing (given the offensive content of your posts) is ruining it for me every time I see it now.
.
4yanx
1,576 posts
 
And I'm trying to "enjoy the music", but your trite little closing (given the offensive content of your posts) is ruining it for me every time I see it now.

Me two (or, is that umpteen?).
psychicanimal
1,738 posts
 
Raoul, why don't you contribute your knowledge in the Vinyl Asylum? It's *different* there...

http://www.audioasylum.com/audio/vinyl/

I'm sure your style will be well taken...

Regards and enjoy the music.

***
msiebers's avatar
msiebers
22 posts
 
Doug, I agree that analog equipment has improved, however, the issues created by too low a resonant frequency do not go away with modern equipment. The issues presented in the article deal entirely with the tonearm, cartridge, and record. As the article states, Wow and flutter, distortion, mistracking, and rumble can be caused entirely as the result of too low a resonant frequency.

I have read some other posts that mention a lower resonant frequency enhances bass response, but this could just be the result of bass imtermodulation, as mentioned in the article.

As far as your experience with changing counterweights, I believe that this type of activity will change resonant frequency less than a hertz, which I do not view as a comprehensive test.

So, I believe that you hear a difference with higher resonant frequency combinations, but perhaps it is the absence of bass intermodulation that you are hearing! I have an open mind on the subject. At any rate, thanks for sharing your experience. I admire the energy and enthusiasm you have for analog.
More to discover