tracking distortion on a p5 + rega cartridge?


Recently purchased a P5 and Super Elys cart... with most of my records (new, vacuum-cleaned) I get frequent distortion/pops/crackling in the right channel. Left channel is fine. I need to fix this ASAP.

Is this tracking distortion? I thoughts that with rega's 3-hole mounting I didn't need to worry about alignment when using rega cartridges.

Please tell me the best way to go about solving this problem. Thanks ;)
allyourbetas
Is this a digital or analog recording?Your bass sounds possibly too "fat" and your cymbals possibly "dull".This could be due to firstly an incorrect tracking weight and then the VTA would have to be adjusted accordingly.I don't think Rega's have VTA adjustment,but go to the Walker Audio site and you will see a link to fine-tuning your table,on the left.I don't think you would totally get rid of the noise but there is plenty of info about correct alignment,overhang,azimuth etc. for the Rega arm over at the Vinyl Asylum archives.
"Your bass sounds possibly too fat and your cymbals possibly dull."

Actually, that is how the music should sound for that particular passage (a fat synth line and dull kickdrum). I'm not concerned with the highs/lows, it's the distortion in the right channel I'm worried about...
The point about the way a record "sounds" indicates something about the cartridge and issues it could be having.This is very subjective and you must use your ears very critically listening for the small things.With a good table like a Rega P5 you should look for every clue.You should worry about alignment and not accept the Rega method as the last word.Many prefer a Baerwald aligment over Rega's as it gets better results with distortion.The sound and surface noise you hear will change with the cartridge model and alignment system you use.Records themselves must be cleaned even before their first play.The manufacturing process leaves debris in the grooves and surface of a record,which acts as missiles on the groove walls destroying a record, if the record has not been thoroughly deep groove cleaned first.If you are doing this(cleaning) and there is distortion,claim a refund or new copy.Many complain today about damaged new pressings from various companies.You could also have a damaged stylus which chews up records,do not play anything if ALL your records are distorting and get a professional to check your set-up.
These records are vacuum-cleaned before any playing, as is the stylus.

I guess I should try the Baerwald aligment instead of using the stock rega template. I just have a hard time imagining that this distortion is normal when the cart is aligned according to the manufacturers specs.

Oh, I should also mention that the distortion is far more active when playing the outer edges (beginning) of a record.
A good test for cartridge mistracking is to play the last track of a record and to assess how well a table is performing,but if you are noticing a change in distortion levels that is consistent,double-check your alignment.This can be laborious but there is no other way.I would be wary of the cartridge for the moment and not risk any further damage to your L.P's.Something is wrong.Make your sure cleaning methods are not the culprit-i.e double check everything.Too harsh cleaning can cause irreparable damage.Manufacturer's spec's it must be pointed out also are only a guide,things like required tracking force can change with the weather,if not a record.If you can try another cartridge(not necessarily a Rega)to see what happens.