Damping fluid/grease for Mayware Unipivot?

Just click onto turntablebasics for their silicone fluid, quite cheap. You fill the cup by ear: too much fluid will kill the sound, not enough and you lose control. Easy as pie. I've also used very thick hydraulic oil with success, though your living room will smell like a garage. Olive oil does not have enough damping to it, only good if your 'table has utterly no dynamics.

When I had my first Hadcock I was told that STP worked well. A tip I've heard is that radio-controlled model shops sell silicone damping fluid which is identical to hifi silicone fluid - apart from a more realistic price tag.

Thanks for the pointers. I had intended to stick to silicone fluid bought from the local electrical suppliers but do not know what grade to get: a thick grease or a relative thin fluid. Obviously I can buy several grades and experiment but I had hoped to find out what was supplied with the arm originally.

I reiterate: turntablebasics silicone fluid is quite cheap, real-world price. I have tons of experience with Maywares and other unipivots: olive oil is only good if your 'table has utterly no dynamics, where damping is not required. The more dynamic the sound of your 'table/tonearm/cartridge combo, the more beneficial damping is. The thicker the fluid the more damping an equivalent amount of fluid will apply. Turntablebasics has various grades which they explain in full on their website, click on it. "Standard" fluid provided by Mayware or any other company is meaningless, as it depends on the cartridge and turntable used, and can only be done by ear. A little fluid which is very thick gives the same damping as a lot of thin fluid. Buy the trurtablebasics-recommended fluid for tonearms, and experiment by ear (a lot to a little or none at all) to get the best result. The Mayware/Ortofon combo on a belt-drive requires only a little damping with thinner oil, any more and the dynamics and bass disappear. The Mayware/Ortofon combo on my Lenco requires a lot of thick silicone fluid (the cup filled to the top) because the Lenco dynamics are outrageous. There is no standard.