2. analog
  3. 1119732678

Please help me I am in trouble with my new table..

Hello,

I have been waiting for my cartridge to arrive to set up my new Nottingham Spacedeck w/ Anna arm. This is the first time I have ever attempted to set up a table. I have been getting prepared for this for months. I had everything ready and just when I was almost done I broke a tonearm wire at the clip where it connects to the cart. I can't believe this. I was trying to be as gentle as possible having been warned they were fragile. I am beyond upset. Can someone please tell me how hard this is going to be to get fixed. Can I do it here? This is unbelievable. Please direct me to a thread or how I can get this figured out. I have been buying albums for the past 3 months and now I just feel like I am about to give up. Thanks and sorry for the complaining, just massively disappointed.
nicksgem10s
nicksgem10s OP
98 posts
 
I really want to thank everyone for the help and the offers to repair the damage. I talked to the person I bought the table & arm from (audiogon member) and he is willing to repair it for me. Enjoying this hobby is much easier with all the great people who participate. My wait will be a little longer than I originally thought. I am hoping the resulting sound will all be worth it in the end. Thanks again, especially Albert.
marakanetz's avatar
marakanetz
5,473 posts
 
Here's what can be done in this situation:
Take a piece of solid-core cooper wire 12AWG and pry it at the end with pliers so that you will have a screwdriver-like ending.
Then take a thin wire i.e. 22...24AWG and affix the made-up solid core one to the soldering iron tip.
Try to pool the damaged wire from the armtube gently and than strip it a-bit deeper so that you can join clip and wire together easier. If you can't you'll just have to be more patient and careful not to loose this wire forever.
While holding the clip with tweezers dip the above described "adapter" end onto the solder and quickly touch the clip joined with an arm wire.
The solder should slide onto the joined surfaces.
ije
29 posts
 

Hi Nicks,

I am in the Detroit suburbs too and spanking new member of audiogon, tho I have been reading up for a long time. If you still need help right away, go visit Harry @ Audio Dimnesions on Woodward in Royal Oak. Great guy.

He is about the only guy into real analog in the area as far as I know and you definitely want to know him. I am sure he can help you with a fix. If I stop there this week I will give him a heads up that you might stop by, in case you do.

If I can be of help, drop me a line.

I am just freshly getting into Vinyl and I have to tell you it is habit forming. Addictive. Practically living in these forums now. But having a great time and spinning records every day now.
gibson58
32 posts
 
don't worry about it. I did the same thing on my well tempered classic and was freaking out also. I stripped the wire, dipped it in flux and soldered the new clip on. no big deal. took all of 2 minutes. If you decide to do it yourself, buy a decent soldering iron and flux (is the key). The solder coats the flux in about 2 seconds and you are done. cover it with some heat shrinking plastic, and good as new.
simon74
216 posts
 
Hi,
did you get this sorted ?
Si
More to discover