hospital grade or commercial grade receptacles ?

To those that say outlets (or power cords, or plugs) have a sonic signature... how do you believe this happens? You have many, many feet of 12-14ga Romex (or equivalent) in your house. Some of you have aluminum wires. Then you assume that the termination of all of that simple, cheap wiring at the outlet, as compared to a different termination (that can be shown to have inconsequential resistance), has a sonic signature? This is akin to astrology. I have no doubt that some people believe they hear differences, but the far and away most likely scenario is that there are no differences between outlets (that function properly within their specs), no sonic differences attributable to cryogenics, and that same reasoning can be extended to power cords with reasonable gauges for the loads involved. The difference you think you hear isn't real. It's in your head and nowhere else.

Even if you assume, just for the point of argument, that there is a difference in sonics that could happen between outlets, how would that difference survive the voltage step-down of the component's power transformer? Or the rectification to DC? Or the capacitors? Before all of those electrons hit any sort of active circuitry?

Doesn't this seem unreasonable? Did all of you sleep during high school physics? I'm assuming there's no one arguing here that even vaguely understands electrical engineering...

In response to Irv,

I'm not saying that physics doesn't matter. And I'm not a scientist-- although I am a professor, and therefore used to thinking skeptically, and demanding proof from myself and from my students in our work in the humanities. And heck if I know why some outlets (and power conditioners, and power cords) sound different. But the fact is, they do (at least through my Audio Research electronics, Vandersteens, and good cabling: your equipment might reveal more or fewer of these differences. Some equipment, including very, very good equipment, doesn't change much when altering peripherals). And not a little, and not subtley. You don't have to be a true believer, or a crank. This is audible, and easily audible, to people who don't care one way or the other (such as my wife). In my case, FIM outlets were too dark sounding for the associated equipment-- a phenomenon many others attest to independantly-- and Wattgates were much clearer and brighter (the same applies). As with so many other things in science, one notices the phenomenon first, and then hopes to find the the underlying mechanism that explains it. Although we try to pretend it isn't, much medical research is based upon this fact.

Here's a plausible explanation as to why power cords make a difference:

It's my understanding that standard wiring for 15 amp house circuits is 14 AWG with three conductors. Many components come with detachable cheap 18 AWG power cords with molded connectors. The 18 AWG cords can present a bottleneck between house wiring and a component's internal wiring. Whether one hears a difference with thicker wires, depends on the quality of the component's internal wiring. High quality amplifiers may use anywhere from 14 to 8 AWG internally. In that case, common sense tells me that better cables will make a noticeable difference.

BTW: Recommend you check out Pinnacle power cords made by Panamax. They have excellent specs for the money. I found them surfing the web...

Best regards,
Jay

Oh no--not again!

Hard wire is best!