2. digital
  3. 1028484245

Why upgrade transport???

My front end is a Pioneer PD65 used as a transport via illuminati D60 to an Assemblage D2D-1 jitter reducer/upsampler, via I2Se cable to an Assemblage DAC 3.0, which has upgrades including the Burr Brown DF1704 24/96 filter and OPA 627 op amps. The rest of my system is run balanced out of the 3.0.

My question is, since the D2D-1 does both reclocking and upsampling to 24/96, would there be any benefit to a transport upgrade, and what could I expect? I was looking at a moderate upgrade such as to the Sonic Frontiers SFT, or maybe a Meridian. The setup will be used only for CD music, and not for SACD or DVD.

As a second option, are there relatively simple mods to the PD65, which would provide a sonically better front end, such as disconecting the D/A portion of the circuitry, improving the power cord, sound coat, or others?

As always, thanks for your comments and help,

Tim
mitch2
jvogt
212 posts
 
I owned a Denon 1620 which I used for years as a transport,
then upgraded to an EAD T-1000. The latter was an improvement. About two years ago I sold my EAD and got
a Mark Levinson #37. This was an even bigger improvement
over the EAD. The jitter control circuitry in the better
transports can make a substantial improvement in sound.
mitch2 OP
4,086 posts
 
Thanks everyone for your comments and recommendations. As I suspected, I will probably hear a significant difference with a better transport. However, I need to stay within a budget in the ballpark of $1000 used. I have heard great things about a relatively inexpensive transport, the Vecteur D-2. I have also considered the Sonic Frontiers SFT-1 and Wadia 22. Any comments about these, or further suggestions?

Tim
tireguy
1,964 posts
 
Mitch- I don't know how attached you are to the rest of your gear or even what it is worth, but if you could sell it all and get an audio aero capitole mk I or mk II, I think you would be very pleased. Run it direct to the amp and it will blow you away, not to mention with less cableing. Long ago a very wise audiophile told me the simplier a system is typically the better it will sound(to me it only makes sense, less things to screw up) look at vinyl why is it better? because it is MUCH simpler. This is just my opinion though YMMV. ~Tim
basement
245 posts
 
Tim,
I've seen data 2's for about 500 bones all over lately. I've heard really good things of them, evan comparisans to levinsons, I bought one and was shocked.
The basis for this is IF you have all you clocking and jitter dealt with in the sophistication you already have, may be only upgrading the stability of the transport itself, (or to some degree) which makes a big difference. The data is a big, solid monster. Like tireguy says, simpler is better I have found, and the data has good jitter control, but you may discover your stuff is quite good too.
Then, it seems to me the only way to upgrade, is to get a good transport with 24/96 capability anyway, which leaves you having to sell anyway, and that only leaves one more conponent to sell.
sfstereo
215 posts
 
The Pioneer PD65 is a very good transport and it was used by Wadia and Theta. If you are planning to buy a used transport, check with the manufacturer to see if they still have spare transport parts. Philips stopped making the transport that's used in the Sonic Frontiers SFT1 a couple of years ago.
More to discover