Mac Mini Power Supply

If I may ask, what type of PS did you build? I've debated on buying or building one, and am debating on how far one needs to take it.

I am surprised a linear power supply made any difference at all!

Min,

Can you build me one?

What difference did you hear?

I heard a bigger difference in my system than upgrading an amplifier.

I built a linear PSU based on the LM338 regulator. I used Nichicon Muse caps and built a power supply that could probably be used for a decent solid state amplifier. WAY overkill -- if there is such a thing when it comes to PSUs.

I have always found switchmode supplies to be VERY noisy and mechanical sounding. Switching to a nice linear power supply for the mini was like night and day, I couldn't be happier.

I can build more, sure. Send me an email and I'll figure out what it cost me to build it and give you a price.

I'm not a tweaker in the sense that I don't like making changes to my system that are debatable. I like tangible changes that anyone walking into the room would hear. I would go as far to say as anyone using a computer for audio NEEDS a linear power supply to get the most out of their system, given the price-performance ratio of the upgrade it's a no brainer.

As far as "how far one needs to take it"...

I'd say the higher quality the better. Nichicon Muse are what I consider my "middle-end" caps.

At some point I'll probably build a Mini PSU using Jensen 4-pole caps ($90+ each) like I use in my amp. But that's a monster power supply that I've only seen in $30k+ amplifiers so if ANYTHING was overkill for a Mini that would be it.

If you are going to build a PSU yourself make sure you have proper tolerance parts. They need to be able to handle the 2-6A that the Mini draws depending on the peripherals attached. That means rectifier diodes and regulators need to be appropriate. There is also an "iSense" connector that needs a resistor attached to it.

If it's a project you're thinking of undertaking I'm happy to recommend some parts as well.